User`s guide
Structure
This manual is organized as follows:
Chapter 1 Describes the StorageWorks product line.
Chapter 2 Describes how the shelf and the device status are monitored and
reported. This chapter includes recommended corrective action for
fault conditions.
Chapter 3 Describes the procedures for replacing SBBs and shelves.
Chapter 4 Describes the StorageWorks power supplies, to include function,
operation, and status reporting.
Chapter 5 Describes the SBB shelf SCSI buses, including length,
terminators, jumpers, and devices.
Chapter 6 Describes the DWZZA–VA SCSI bus converter that provides
compatibility between an 8-bit differential SCSI–2 bus and the
8-bit single-ended SCSI–2 bus.
Appendix A Lists the physical and electrical specifications for the
StorageWorks family components.
Glossary Definitions of StorageWorks subsystem terms.
Index Cross-reference to major topics.
Related Documents
Table 1 lists the StorageWorks related user documents organized by use, system,
or product.
Table 1 StorageWorks Related Documentation
Document Title Order Number
StorageWorks Primary Publications†
StorageWorks Family Configuration Guide EK–BA350–CG
StorageWorks Family User’s Guide ‡ EK–BA350–UG
StorageWorks Family StorageWorks Building Blocks User’s Guide EK–SBB35–UG
StorageWorks RAID Array 110 Subsystem
BA350–EA Modular Storage Shelf User’s Guide EK–350EA–UG
BA35X–VA Vertical Mounting Kit User’s Guide EK–350SV–UG
DEC RAID Utilities User’s Guide EK–DECRA–UG
HSZ10–AA Controller Site Preparation Guide EK–HSZ10–IN
StorageWorks Expansion Storage Pedestal User’s Guide EK-SMCPA-UG
StorageWorks RAID Array 110 Subsystem User’s Guide EK–SM2CA–UG
StorageWorks RAID Array 110 Utility for MS–DOS User’s Guide AA–Q0N5A–TE
† Provided with each system.
‡ Includes BA350–SA SBB shelf user’s guide.
†† Available from your Digital account representative.
(continued on next page)
viii