User`s guide

Device SCSI Status

Target

01234567

P1 DDDDFhH

o2TTT T hH

r3DDD hH

t4DDDDDDhH

5DDDD hH

6hH

Description

This display shows what devices the controller has been able to identify on the

device busses.

Note

The controller does not look for devices that are not conﬁgured into the

nonvolatile memory using the CLI ADD command.

The column headings indicate the SCSI target numbers for the devices. SCSI

targets are in the range 0 through 7. Target 7 is always used by a controller.

In a dual controller conﬁguration, target 6 is used by the second controller.

The device grid contains a letter signifying the device type in each port/target

location where a device has been found:

• C indicates a CD–ROM device.

• D indicates a disk device.

• F indicates a device type not listed above.

• H indicates bus position of this controller.

• h indicates bus position of the other controller.

• L indicates a media loader.

• T indicates a tape device.

• A period (.) indicates the device type is unknown.

• A space indicates there is no device conﬁgured at this location.

This subdisplay contains a row for each SCSI device port supported by the

controller. The subdisplay for a controller that has six SCSI device ports is

shown.

7–44 Diagnostics and Utilities