User`s guide

List of Current Patches
The List Patches option allows you to display a listing of controller firmware
versions, and the currently installed patches that apply to them.
The following is an example of the List Patches option:
CLI> RUN CLCP
Select an option from the following list:
Code Load & Code Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
Enter option number (0..2) [0] ? 2
----------------------------------------------------------------------
You have selected the Code Patch local program. This program is
used to manage firmware code patches. Select an option from the
following list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ? 3
The following patches are currently stored in the patch area:
Firmware Version - Patch number(s)
______ _________
123456 - 1
XLZ6 - 2,1
Currently, 91% of the patch area is free.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?
Note
The SHOW THIS_CONTROLLER command also provides patch
information in the form of a ‘‘dash number’’ following the firmware
version. In the following example, firmware version 2.0 has had patches
applied up to patch number 3:
CLI> SHOW THIS_CONTROLLER
Controller:
HSZ40 ZG33400026 Firmware V020-3, Hardware 0000
.
.
.
7–76 Diagnostics and Utilities