User`s guide

CLI> RUN CLCP
Select an option from the following list:
Code Load & Code Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
Enter option number (0..2) [0] ? 2
----------------------------------------------------------------------
You have selected the Code Patch local program. This program is
used to manage firmware code patches. Select an option from the
following list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ? 1
This is the Enter a Patch option. The program prompts you
for the patch information one line at time. Be careful
to enter the information exactly as it appears on the patch release.
Patches may be installed for any version of firmware; however,
patches entered for firmware versions other than XLZ6 are not
applied until the matching version of firmware is installed. To enter
any patch, you must first install all patches with lower patch
numbers, beginning with patch number 1, for a specific firmware version.
If you incorrectly enter the the patch information, you are given
the option to review the patch one line at a time.
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Do you wish to continue (y/n) [y] ? Y
Version: ? v15j
WARNING
The patch you are entering is not for the current firmware
version (XLZ6 ). The patch you are entering is for firmware
version V15J .
This patch will NOT be applied to the current firmware.
Length: ? 10
Patch Type: ? 0
Patch Number: ? 1
Count: ? 1
Address: ? 99
Value[ 0] ? 0
Count: ? 0
Verification: ? 39d6c0bb
You incorrectly entered the patch information. The
program prompts you for each line of the patch entry, with the
default from your previous response. Please verify that each
entry is exactly the same as the patch release. If you choose
not to continue, or if you abort during this review procedure,
the patch information you entered is lost and you must
reenter the entire patch again.
Do you wish to continue (y/n) [y] ? Y
7–82 Diagnostics and Utilities