User`s guide

Example 7–11 (Cont.) Cloning a Stripeset
Clone - Normal Termination
HSJ> SHOW DEVICES
Name Type Port Targ Lun Used by
------------------------------------------------------------------------------
DISK130 disk 1 3 0 ST1
DISK200 disk 2 0 0 ST1
DISK220 disk 2 2 0 C_MA
DISK240 disk 2 4 0 C_MB
DISK310 disk 3 1 0
HSJ> SHOW STRIPESETS
Name Storageset Uses Used by
------------------------------------------------------------------------------
C_ST1 stripeset C_MA D798
C_MB
ST1 stripeset DISK130 D799
DISK200
HSJ>
To manually clone a stripeset use the following commands in sequential order:
1. SHOW DEVICES
2. SHOW UNITS
3. MIRROR disk-device-name1 container-name1
4. SET mirrorset-container-name1 NOPOLICY
5. SET mirrorset-container-name1 MEMBERSHIP=
6. SET mirrorset-container-name1 REPLACE=
7. MIRROR disk-device-name2 mirrorset-container-name2
8. SET mirrorset-container-name2 NOPOLICY
9. SET mirrorset-container-name2 MEMBERSHIP=
10. SET mirrorset-container-name2 REPLACE=
Wait for NORMALIZATION of all new mirrorset members.
11. REDUCE disk-device-name disk-device-name[N]
12. UNMIRROR disk-device-name
13. UNMIRROR disk-device-name
14. ADD MIRRORSET mirrorset-container-name1 disk-device-name
15. ADD MIRRORSET mirrorset-container-name2 disk-device-name
16. ADD STRIPESET stripeset-container-name mirrorset-container-name1
mirrorset-container-name2
17. INITIALIZE stripeset-container-name NODESTROY CHUNK=
18. ADD UNIT unit-name stripeset-container-name
7–90 Diagnostics and Utilities