User`s guide

Example 8–4 (Cont.) uerf HSZ40 Array Controller Error Event Log
ERROR CODE x0070 CODE x70
SEGMENT x00
SENSE KEY x0004 HARDWARE ERR
INFO BYTE 3 x00
INFO BYTE 2 x00
INFO BYTE 1 x00
INFO BYTE 0 x00
ADDITION LEN x98
CMD SPECIFIC 3 x00
CMD SPECIFIC 2 x00
CMD SPECIFIC 1 x00
CMD SPECIFIC 0 x00
ASC x44
ASQ x00
FRU x00
SENSE SPECIFIC x000000
ADDITIONAL SENSE
0000: 00030000 01080108 00000206 40020000 *...............@*
0010: 01510309 08002800 01DA681B 01000000 *..Q..(...h......*
0020: 00000700 20202020 58432020 33323130 *.... CX0123*
0030: 37363534 5A373845 00000000 36333400 *4567E87Z.....436*
0040: 325A5241 20202038 43282020 45442029 *ARZ28 (C) DE*
0050: 00000043 00000000 00000004 00000000 *C...............*
0060: 01080000 00000000 00000000 00000000 *................*
0070: 00000000 00000000 00000000 00000000 *................*
0080: 00000000 00000000 00000000 00000000 *................*
0090: 7E250000 00005E3C 00000000 00000000 *..%~<^..........*
The uerf utility may also display unsupported error entries. This could be
because of new device drivers or routines that are unknown to the error formatter
and the error formatter has not been updated to include new routines. To help
display those types of errors, use the -Z qualifier. The data is displayed in hex
format. The command format is: uerf -Z -o full -r 199 -R
The names of the routines and the nature of the problem are displayed in the
ASCII representation portion of the hex data as shown in Example 8–5.
Example 8–5 uerf Utility Error Event Using the -Z Qualifier
********************************* ENTRY 1. *********************************
----- EVENT INFORMATION -----
EVENT CLASS ERROR EVENT
OS EVENT TYPE 199. CAM SCSI
SEQUENCE NUMBER 4.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Fri Jan 27 11:04:26 1995
OCCURRED ON SYSTEM joey
SYSTEM ID x00000009 CPU TYPE: DEC 2100
SYSTYPE x00000000
----- UNIT INFORMATION -----
CLASS x0033
SUBSYSTEM x0000 DISK
BUS # x0002
----- CAM STRING -----
(continued on next page)
8–20 Operating System Support