User`s guide

ADD STRIPESET
ADD STRIPESET
Creates a stripeset from a number of containers.
Format
ADD STRIPESET container-name container-name1 container-name2 [container-nameN]
Parameters
container-name
Specifies the name that is used to refer to this stripeset. The name must start
with a letter (A–Z) and can then consist of up to eight more characters made up
of letters A–Z, numbers 0–9, periods (.), dashes (-), or underscores (_), for a total
of nine characters.
container-name1 container-name2 container-nameN
The containers that will make up this stripeset. A stripeset may be made up of
from 2 to 14 containers.
Description
Adds a stripeset to the list of known stripesets and names the stripeset. This
command must be used when a new stripeset is added to the configuration.
Examples
1.
CLI> ADD STRIPESET STRIPE0 DISK100 DISK110 DISK220 DISK340
Creates a STRIPESET with four disks (DISK100, DISK110, DISK220, and
DISK340).
2.
CLI> ADD STRIPESET STRIPE1 MR1 MR2 MR3
Creates a STRIPESET with three members, each of which is a mirrorset.
B–14 Command Line Interpreter