User`s guide

CLEAR_ERRORS CLI

Stops displaying errors at the CLI prompt.

Format

CLEAR_ERRORS CLI

Description

Errors detected by controller ﬁrmware are displayed before the CLI prompt.

These errors are displayed even after the error condition is rectiﬁed, until the

controller is restarted or the CLEAR_ERRORS CLI command is issued.

Note

This command does not clear the error conditions, it only clears displaying

the errors at the CLI prompt.

Examples

CLI>

All NVPM components initialized to their default settings.

CLI> CLEAR_ERRORS CLI

CLI>

Clears the message ‘‘All NVPM components initialized to their default

settings.’’ that was displayed at the CLI prompt.

Command Line Interpreter B–27