Manualshelf

User`s guide

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorStorage Works
371372373374375376377378379380
CLEAR_ERRORS UNKNOWN
CLEAR_ERRORS UNKNOWN
Clears the UNKNOWN error from a device.
Format
CLEAR_ERRORS UNKNOWN
device-name
Parameters
device-name
Specifies the device name of the device with the UNKNOWN error.
Description
Note
‘‘UNKNOWN’’ must be completely spelled out, not abbreviated.
If a device has a failure such that the controller marks the device as UNKNOWN,
the device is never automatically checked again to see if it has been repaired or
if the failure condition was rectified. When you rectifiy a condition that caused a
device to be marked UNKNOWN, this command must be issued for the controller
to recognize the device.
Examples
1.
CLI> CLEAR_ERRORS UNKNOWN DISK300
Causes the controller to recognize DISK300, a previously UNKNOWN device.
B–30 Command Line Interpreter