User`s guide

DELETE FAILEDSET
DELETE FAILEDSET
Delete a disk drive from the failedset.
Format
DELETE FAILEDSET disk-container-name0 [disk-container-nameN]
Parameters
disk-container-name0 disk-container-nameN
The disk drive container names to delete from the failedset. Any number of disks
may be deleted from the failedset using only one command.
Description
The FAILEDSET is a group of drives that were removed from RAIDsets and
mirrorsets, either because they failed or because they were manually removed
via the SET command. Drives in the failedset should be considered defective and
should be tested, then repaired or replaced. The DELETE FAILEDSET command
removes drives from the failedset, typically before you remove them physically
from the shelf for testing, repair, or replacement.
Examples
1.
CLI> DELETE FAILEDSET DISK220
Deletes one disk from the failedset.
2.
CLI> DELETE FAILEDSET DISK100 DISK210 DISK220 DISK330 DISK400
Deletes five disks from the failedset.
Command Line Interpreter B–33