Manualshelf

User`s guide

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorStorage Works
381382383384385386387388389390
LOCATE
LOCATE
Locates units, storagesets, and devices by lighting the amber device fault LED on
the front of the StorageWorks building block (SBB).
Format
LOCATE
Description
The LOCATE command illuminates the amber device fault LEDs (the lower LED
on the front of an SBB) of the containers specified. The LOCATE command also
can be used as a lamp test.
Qualifiers
ALL
The LOCATE ALL command turns on the amber device fault LEDs of all
configured devices. This qualifier also can be used as a lamp test. See LOCATE
CANCEL to turn off the LEDs.
An error is displayed if no devices have been configured.
CANCEL
The LOCATE CANCEL command turns off all amber device fault LEDs on all
configured devices.
An error is displayed if no devices have been configured.
DISKS
The LOCATE DISKS command turns on the amber device fault LEDs of all
configured disks. See LOCATE CANCEL to turn off the LEDs.
An error is displayed if no disks have been configured.
LOADERS
The LOCATE LOADERS command turns on the amber device fault LEDs of all
configured loader devices. See LOCATE CANCEL to turn off the LEDs.
An error is displayed if no loader devices have been configured.
OPTICALS
The LOCATE OPTICALS command turns on the amber device fault LEDs of all
configured optical drives. See LOCATE CANCEL to turn off the LEDs.
An error is displayed if no optical drives have been configured.
TAPES
The LOCATE TAPES command turns on the amber device fault LEDs of all
configured tape devices. See LOCATE CANCEL to turn off the LEDs.
An error is displayed if no tape devices have been configured.
Command Line Interpreter B–41