User`s guide

SET OTHER_CONTROLLER
TERMINAL_PARITY=ODD
TERMINAL_PARITY=EVEN
NOTERMINAL_PARITY
Specifies the parity transmitted and expected. Parity options are ODD or EVEN.
NOTERMINAL_PARITY causes the controller to not check for, or transmit any
parity on the terminal lines.
When first installed, the controller’s terminal parity is set to
NOTERMINAL_PARITY.
TERMINAL_SPEED= baud_rate
Sets the terminal speed to 300, 600, 1200, 2400, 4800, 9600 or 19200 baud. The
transmit speed is always equal to the receive speed.
When first installed, the controller’s terminal speed is set to 9600 baud.
TIME= dd-mmm-yyyy:hh:mm:ss
The TIME= commmand specifies the date and time. If the controller is in a
dual-redundant configuration, the time is communicated to the other controller.
Examples
1.
CLI> SET OTHER_CONTROLLER PATH_A PATH_B SPEED=1200
Modifies the other HSJ controller’s two CI paths and sets the terminal speed
to 1200 baud.
B–72 Command Line Interpreter