User`s guide

SHOW TAPES
SHOW TAPES
Note
This command is valid for HSJ and HSD controllers only.
Shows all tape drives and tape drive information.
Format
SHOW TAPES
Description
The SHOW TAPES command displays all the tape drives known to the controller.
Qualifiers
FULL
If the FULL qualifier is specified, additional information may be displayed after
each device.
Examples
1.
CLI> SHOW TAPES
Name Type Port Targ Lun Used by
------------------------------------------------------------------------------
TAPE200 tape 2 0 0
Shows a basic listing of tape drives.
2.
CLI> SHOW TAPES FULL
Name Type Port Targ Lun Used by
------------------------------------------------------------------------------
TAPE200 tape 2 0 0
DEC TLZ06 (C)DEC 0491
Shows a full listing of tape drives.
B–118 Command Line Interpreter