User`s guide

SHOW UNITS
SHOW UNITS
Shows all units and unit information.
Format
SHOW UNITS
Description
The SHOW UNITS command displays all the units known by the controller. First
disks (including CDROMs) are listed, then tapes.
Qualifiers
FULL
If the FULL qualifier is specified after UNITS, additional information may be
displayed after each unit-number, such as the switch settings.
Examples
1.
CLI> SHOW UNITS
MSCP unit Uses
--------------------------------------------------------------
D401 R0
T41 TAPE200
Shows a basic listing of units available on the controller.
2.
CLI> SHOW UNITS FULL
MSCP unit Uses
--------------------------------------------------------------
D401 R0
Switches:
RUN NOWRITE_PROTECT READ_CACHE
NOWRITEBACK_CACHE
MAXIMUM_CACHED_TRANSFER_SIZE = 32
State:
AVAILABLE
No exclusive access
NOPREFERRED_PATH
Size: 2050353 blocks
T41 TAPE200
Switches:
DEFAULT_FORMAT = DEVICE_DEFAULT
State:
AVAILABLE
No exclusive access
Current Format = DAT_DDS_NOCOMPRESSION
NOPREFERRED_PATH
Shows a full listing of units available on the controller.
Command Line Interpreter B–123