User`s guide

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorStorage Works

481

482

483

484

485

486

487

488

489

490

Error 4160: Unable to rundown the following units on this controller: <list of

problem units>

Explanation: When attempting to SHUTDOWN, RESTART or SELFTEST

this controller, some units could not be successfully run down. This can be

caused either by online units or errors when trying to rundown the units.

Either rectify the problems on the problem units or issue the SHUTDOWN,

RESTART or SELFTEST command with the qualiﬁer OVERRIDE_ONLINE

or IGNORE_ERRORS.

Error 4170: Only <max targets> targets may be speciﬁed

Explanation: When setting THIS_CONTROLLER or OTHER_

CONTROLLER ID=, you speciﬁed too many IDs; you can only specify up

to <max targets> IDs.

Retry the SET THIS_CONTROLLER ID= command with no more than <max

targets> IDs speciﬁed.

Error 4180: Invalid unit number(s) still present that must be deleted before the

controller ID may be changed. All unit numbers must be in the range(s):

Explanation: You attempted to change the controller IDs when there were

still units using those IDs. The current valid unit ranges are given by the

<start> and <end> values.

Either delete the units that use the ID that will no longer be speciﬁed, or

Retry the SET THIS_CONTROLLER ID= specifying the ID being used by the

existing units.

Error 4190: The time must be speciﬁed in the format dd-mmm-yyyy:hh:mm:ss

Explanation: On the HSZ controllers only, the time must be speciﬁed as

shown.

Retry the command using the correct time format.

Error 4200: CACHE_FLUSH_TIMER must be in the range 1 to 65535

Explanation: The value given for the CACHE_FLUSH_TIMER is out of

range.

Reissue the command specifying a number in the range shown.

Error 4210: Only targets deﬁned by the ID= command may be speciﬁed on the/

PREFERRED_ID= qualiﬁer

Explanation: HSZ only. The PREFERRED_IDs speciﬁed must be a subset

of the IDs (targets) supported by the controller. When changing either the

supported targets or the preferred ids, it was found that the PREFERRED_

IDs were not a subset of the IDs.

Reissue the command with valid PREFERRED_ID= arguments or change the

IDs supported by the controller.

Error 5000: A program name must be from 1 to 6 characters in length

Explanation: This error results from a ‘‘RUN <program name>.’’

Error 5010: The requested program is currently busy.

Explanation: This error results from a ‘‘RUN <program name>.’’ The

program requested is being run by someone else.

B–140 Command Line Interpreter