User`s guide

Warning 7020: Unable to clear UNWRITEABLE_DATA on other controller
Explanation: When trying to clear UNWRITEABLE_DATA on the other
controller, a communication error occurred.
Retry the command. If the failure persists, contact Digital Multivendor
Customer Services.
Warning 9000: Drive has LOST_DATA
Explanation: During a check of the drive’s metadata, it was detected that
the drive had lost data.
Clear the lost data error on the drive.
Warning 9030: Cannot determine if the correct device type is at the PTL specified
Explanation: When a device is added, the location specified is checked to
see if the correct device type is present. This warning results when no device
responds from the location specified.
Check the physical configuration and the PTL that was specified.
Warning 9040: There is currently a <device type> at the PTL specified
Explanation: When a device is added, the location specified is checked to
see if the correct device type is present. This warning results when a device
different from the one specified is found at the location specified (for example,
a tape is found where a disk was added).
Check the physical configuration and the PTL that was specified.
Warning 9050: <device type> <device name> at PTL <port> <target> <lun> No
device installed
Explanation: When a unit is added, the configuration of the disks that
make up the unit is checked. If no device is found at the PTL specified, this
warning is displayed.
Check both the logical and physical configuration of the devices that make up
the unit and correct any mismatches.
Warning 9060: <device type> <device name> at PTL <port> <target> <lun>
Incorrect device type installed
Explanation: When a unit is added, the configuration of the disks that make
up the unit is checked. If a non disk device is found at the PTL specified, this
warning is displayed.
Check both the logical and physical configuration of the devices that make up
the unit and correct any mismatches.
Warning 9080: <license> support is not licensed on <controller> controller. Any
use of this feature requires licensing. Continued use does not comply with the
terms and conditions of licensing for this product.
Explanation: You have a licensed feature enabled on this controller but it
is not licensed. This is against the contractual agreement between Digital
and your company. Please disable the licensed feature and contact Digital
Multivendor Customer Services if you wish to purchase it.
Command Line Interpreter B–153