User`s guide

Commands (cont’d)
ADD UNIT, B–16
CLEAR_ERRORS CLI, B–27
CLEAR_ERRORS INVALID_CACHE, 6–9,
B–28
CLEAR_ERRORS LOST_DATA, B–29
CLEAR_ERRORS UNKNOWN, B–30
CLEAR_ERRORS UNWRITEABLE_DATA,
6–8, B–31
DELETE container-name, B–32
DELETE FAILEDSET, B–33
DELETE SPARESET, B–34
DELETE unit-number, B–35
DIRECTORY, B–36
disk-device-name, B–129
EXIT, B–37
HELP, B–38
INITIALIZE, B–39
LOCATE, B–41
LOCATE CANCEL, B–41
LOCATE DISKS, B–41
LOCATE entity, B–42
LOCATE LOADERS, B–41
LOCATE OPTICALS, B–41
LOCATE PTL SCSI-location, B–42
LOCATE TAPES, B–41
LOCATE UNITS, B–42
MEMBERSHIP=number-of-members, B–62
MIRROR disk-device-name1 container-name,
B–43
REDUCE disk-device-name1 [disk-device-
nameN], B–45
REDUCED, B–12
REMOVE=disk-container-name, B–74
REMOVE=disk-device-name, B–63
RENAME, B–47
REPLACE=disk-container-name, B–74
REPLACE=disk-device-name, B–62
RESTART OTHER_CONTROLLER, 2–19,
B–48
RESTART THIS_CONTROLLER, B–50
RETRY_ERRORS UNWRITEABLE_DATA,
B–53
RUN, B–54
SELFTEST OTHER_CONTROLLER, B–55
SELFTEST THIS_CONTROLLER, B–57
SET disk-container-name, B–59
SET FAILOVER, B–60
SET mirrorset-container-name, B–62
SET NOFAILOVER, B–65
SET OTHER_CONTROLLER, B–66
SET raidset-container-name, B–73
SET THIS_CONTROLLER, B–75
SET unit-number, B–82
SHOW cdrom-container-name, B–93
SHOW CDROMS, B–92
SHOW DEVICES, B–94
SHOW disk-container-name, B–96
Commands (cont’d)
SHOW DISKS, B–95
SHOW FAILEDSET, B–97
SHOW loader-container-name, B–99
SHOW LOADERS, B–98
SHOW mirrorset-container-name, B–102
SHOW MIRRORSETS, B–100
SHOW optical-container-name, B–104
SHOW OPTICALS, B–103
SHOW OTHER_CONTROLLER, B–105
SHOW PASSTHROUGH, B–107
SHOW passthrough-container-name, B–108
SHOW raidset-container-name, B–111
SHOW RAIDSETS, B–109
SHOW SPARESET, B–112
SHOW STORAGESETS, B–113
SHOW stripeset-container-name, B–117
SHOW STRIPESETS, B–115
SHOW tape-container-name, B–119
SHOW TAPES, B–118
SHOW THIS_CONTROLLER, B–120
SHOW unit-number, B–124
SHOW UNITS, B–123
SHUTDOWN OTHER_CONTROLLER, B–125
SHUTDOWN THIS_CONTROLLER, B–127
CONFIG utility
description of, 7–57
for adding new devices, 7–57
how to run, 7–57
Configuration
5¼-Inch SBB restrictions, 3–19
3½-inch SBBs, 3–17
atypical, 3–21
combinations, 3–1
command disks, 7–101
deskside RAID enclosure, 3–11, 3–22, 3–23
for 5¼-inch SBBs, 3–20
for highest availability, 3–16
for optimal availability, 3–15
for optimal performance, 3–14
initial steps, 5–11
nonredundant, 5–6
intermixing SBB sizes, 3–21
loaders, 7–101
of devices
of storagesets, 5–9
ordering, 3–1
predefined, 3–1
printing configuration information, 5–6
recommended, 3–17
rules and restrictions, 3–1
starter subsystem, 3–1
storage
automatic, 7–59
SW300-series cabinet shelf, 3–7, 3–22, 3–23
when to use a maintenance terminal, 5–4
when to use a virtual terminal, 5–4
Index–3