User`s guide

Figure 3–5 SW500-Series Controller/Storage Cabinet Shelf and Tape Drive Locations
CXO-3903A-MC
MOUNTING
LOCATIONS
MOUNTING
LOCATIONS
CONTROLLER
POSITION C2
STORAGE
POSITION S5
STORAGE
POSITION S4
CABINET FRONT
CABINET REAR
HOLE
#22
HOLE
#26
HOLE
#32
HOLE
#3
STORAGE
POSITION S3
CONTROLLER
POSITION C1
STORAGE
POSITION S1
STORAGE
POSITION S2
HOLE
#3
HOLE
#20
HOLE
#26
HOLE
#32
HOLE
#14
FRONT-TO-REAR
SCSI-2 CABLE
ROUTING POINTS
TAPE
POSITION T2
TAPE
POSITION T1
TAPE
POSITION T1
TAPE
POSITION T2
HOLE
#19
CDU A
CDU B
INTERNAL
CI CABLE
ROUTING
POINT
CI BULKHEADCI BULKHEAD
3.2.3 SW300-Series Deskside RAID Enclosure
The SW300-series cabinet, as shown in Figure 3–6, is a StorageWorks modular
enclosure designed to hold one controller/storage shelf. The integrated design
of the SW300 cabinet and its shelf virtually eliminates the need for complicated
physical configuring by the operator.
The SW300-series cabinet does not accept the two BA350-series shelf types.
Only the controller/storage shelf is supported at this time. See the StorageWorks
Solutions SW300-Series RAID Enclosure Installation and User’s Guide for more
information on the SW300 deskside RAID enclosure.
3–8 Configuration Rules and Restrictions