Technical data

Index
Figures
1–1 Typical Screen Display of a SHOW DEVICE Command . . . . . 1–5
1–2 Disconnecting the System Unit and Monitor Cables . . . . . . . 1–6
1–3 Removing the VAXstation 3100 System Unit Cover . . . . . . . . 1–7
1–4 Attaching the Antistatic Wrist Strap to the System Unit . . . . 1–8
2–1 Common Configuration for a Model 30 and 38 Drive
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
2–2 Removing RZ2x Fixed Disk Drives from the Drive Plate . . . . 2–4
2–3 SCSI Mass Storage Controller Module Cables . . . . . . . . . . . . 2–5
2–4 Removing the SCSI Mass Storage Controller Module . . . . . . 2–6
2–5 Removing the Drive Plate from a Model 30 or 38 System . . . 2–8
2–6 Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . . 2–10
2–7 Removing the Scanline Coprocessor from the Model 30 and
38 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11
2–8 Removing the Ethernet ROM from the Model 30 and 38
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–12
3–1 Common Configuration for a Model 40 and 48 Drive
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3
3–2 Disconnecting the SCSI and Power Cables . . . . . . . . . . . . . . 3–5
3–3 Removing the Upper Drive Plate from the Model 40 and 48
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6
3–4 Removing RZ2x Fixed Disks from the Drive Plate . . . . . . . . . 3–7
3–5 Lower Drive Plate Configuration . . . . . . . . . . . . . . . . . . . . . . 3–9
3–6 Removing the Lower Drive Plate . . . . . . . . . . . . . . . . . . . . . . 3–10
3–7 Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . . 3–12
3–8 Removing the Scanline Coprocessor from the Model 40 and
48 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
3–9 Removing the Ethernet ROM from the Model 40 and 48
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
4–1 Common Configuration of the Model 76 Drive Plate . . . . . . . 4–2
4–2 Disconnecting the SCSI Signal and Power Cables . . . . . . . . . 4–4
4–3 Removing RZ2x Fixed Disks from the Drive Plate . . . . . . . . . 4–6
4–4 Removing Memory Boards from the Model 76 System . . . . . . 4–8
4–5 Scanline Coprocessor Mounting Brackets . . . . . . . . . . . . . . . . 4–10
v