Technical data

Contents
About This Manual v
1 Unpacking
Identify the boxes. ...................................... 1–1
Unpack the monitor box. . ................................ 1–2
Place the monitor on a level surface. ........................ 1–3
2 Installation
Make sure the power switch is in the out position (off). . . . ....... 2–2
Connect the video cable to the monitor. ...................... 2–3
Connect the power cord. . . ................................ 2–4
3 Operation
Identify monitor controls and power indicator. . . ............... 3–1
Turn the system power on. ................................ 3–3
Adjust the contrast and brightness controls. . . . ............... 3–4
Adjust the tilt-swivel stand. ............................... 3–5
Adjust the centering controls. ............................. 3–6
Press the degauss switch for clear color. ..................... 3–7
4 Maintenance
Clean the screen. ....................................... 4–1
Identify and correct problems. ............................. 4–1
iii