Technical data

4.4.6 Lights and Switches Module
The following hints provide removal assistance:
Hint Procedure
Removal
1 Remove the hard disk drive bracket.
2 Remove the removable media drive bracket.
3 Disconnect the module connector from the system module by lifting up on
the module where it overlaps the system module.
4 Lift the module away from the front of the system.
4.4.7 MS44 Memory Module
Caution
You can easily damage memory components with static electricity.
Wear an antistatic wrist strap when you install or remove memory
components.
Hint Procedure
Removal
1 If you replace a module toward the front of the system board, you must
remove the modules at the back first, and work toward the front.
2 Release the two metal retainers at each end of the memory module connector.
3 Rotate the module backwards (approximately 55 degrees to the rear of the
unit) and lift it out of the slot.
FRU Removal and Replacement Hints 4–9