Technical data

4.5.6 MS40 Memory Module
Caution
You can easily damage memory components with static electricity.
Wear an antistatic wrist strap when you install or remove memory
components.
The following hints provide removal assistance:
Hint Procedure
Removal
1 If you replace a module in the back of the system board, you must remove
the modules at the front first, and work towards the back.
2 Release the two metal retainers at each end of the memory module connector.
3 Rotate the module forwards (approximately 55 degrees to the rear of the
unit) and lift it out of the slot.
4–18 FRU Removal and Replacement Hints