Technical data

D.1 Precautions
Follow these precautions when removing or installing FRUs:
• Only qualified service personnel should remove or install FRUs.
• Electrostatic discharge (ESD) can damage integrated circuits. Always
use a grounded wrist strap (part number 29-11762-00) and grounded work
surface when working with the internal parts of the workstation.
Note
It is the customer’s responsibility to back up the software before Digital
Services personnel arrive at the site. This is important to ensure
that data is not lost during the service process. The customer should
also shut down the workstation software. Before performing any
maintenance work, Digital Services personnel must confirm that the
customer has completed both of these tasks.
D.2 Model 60 System Box FRUs
Table D–1 contains the part numbers for the Model 60 system box FRUs.
Table D–1 Model 60 System Box FRUs
FRU Part Number
KA46 system board 54-20346-01
Lights and switches module 54-20367-01
DSW21 synchronous communication module 54-20377-01
SCSI-FDI control module 54-20764-02
Low res LCG 1024x768 @60 Hz
or 1024x864 @60 Hz (autoswitching)
54-20363-01
8-Plane high resolution color LCG
1280x1024 @ 66 Hz
54-20365-01
8-Plane high resolution monochrome LCG
1280x1024 @ 72 Hz
54-20365-03
8-Plane high resolution dual head color LCG 54-20762-01
(continued on next page)
D–2 FRU Part Numbers