Technical data

2.11 Descriptions of System Tests
You can get summary information about the most recent system test using
either of the two methods described in the following table:
Method Description
Interrupt system test by pressing
Ctrl C
.
Stops the system test and displays summary
screens for the devices.
The display prompts for each summary
screen.
It can take a few moments after entering
Ctrl C
to view the summary screens.
This time is needed to clean up the
interrupted system test.
Enter the SHOW ESTAT (error status)
command at the console prompt.
Displays the summary from the most recent
system test since power-up.
The display prompts for each summary
screen.
Each system diagnostic is also able to display extended status and error
information on its own summary screen. Figure 2–3 shows an example of the
summary screen with a SCSI failure.
Diagnostic Testing 2–27