Technical data

3.1 System Console
Standard console commands for the VAXstation 4000 Model 60 and VLC
systems are listed by functional groups as follows:
Functional Group Description or Example
Additional commands HELP or ?, LOGIN, and REPEAT commands
SET/SHOW commands Used to set or examine system parameters and
configuration
Memory commands DEPOSIT, FIND, and EXAMINE commands
Processor control commands BOOT, CONTINUE, INITIALIZE, START, and
UNJAM commands
3.1.1 Additional Console Commands
The following table describes the VAXstation 4000 Model 60 and VLC
additional console commands:
Command Description
HELP or ? Lists console commands and syntax.
LOGIN Enables restricted console commands when Password Enable (PSE)
is set to 1.
• Enter the LOGIN command at the >>> prompt.
• Enter the 16-character password at the PSWD>>> prompt.
Valid password characters are 0 through 9 and A through F.
REPEAT Continuously repeats the console command that is entered directly
after the REPEAT command.
The following example repeats the memory test:
>>> REPEAT TEST MEM
Terminate the command by pressing
Ctrl C
.
Note: The BOOT, INIT, and UNJAM commands cannot be repeated.
3–2 Using the Console