Technical data

Example 3–1 is an example of a network console session.
Example 3–1 Network Console Session
$ MC NCP
NCP>SHOW KNOWN CIRCUITS
Known Circuit Volatile Summary as of 27-MAR-1991 13:50:02
Circuit State Loopback Adjacent
Name Routing Node
SVA-0 on 25.14
NCP>CONNECT VIA SVA-0 SERVICE PASSWORD 1111111111111111 -
_ PHYSICAL ADDRESS 08-00-2B-1B-48-E3 ! Connects to the console
Console connected (press CTRL/D when finished)
>>> LOGIN
RETURN
! PSE must be set to 1
PSWD0>>> xxxxxxxxxxxxxxxx !Type 16 character password
>>> SHOW CONFIG ! Type console command
KA46-A BL3-186-B3.1 ! System type and firmware revision
08-00-2B-F3-31-03 ! Ethernet hardware address
16 MB ! Total memory
DEVNBR DEVNAM INFO
------ ------ ----
1 NVR OK ! Non-volatile RAM
2 LCG OK ! 2D high res. color graphics rev 2.7
HR - 8 PLN FB - 2.7
3 DZ OK ! Serial line controller
4 CACHE OK ! Cache memory
5 MEM OK ! Memory configuration
16MB = SY=8MB, S0/S1=8MB, S2/S3=0MB, S4/S5=0MB
6 FPU OK ! Floating point accelerator
7 IT OK ! Interval timer
8 SYS OK ! Other system functions
9 NI OK ! Ethernet
10 SCSI OK ! SCSI and drives
1-RZ23L 6-INITR ! One RZ23L at ID 1, system at ID 6.
11 AUD OK ! Sound
12 COMM OK ! DSW21 communications device
13 TCA OK ! TURBOchannel adapter
CTRL/D
NCP> EXIT
$
3–20 Using the Console