User guide

MR-1000 user guide V1.3
15
17. Virtual machine is fully started when terminal window prints “xr 7 login”, see picture
4 below.
NOTE! Don’t close this window!
10.7. RS/ETH Link XR7 GUI settings
Before you can test connection, remember connect power- and Ethernet cables to MR-
1000 controller. RS/ETH Link Ethernet port is connected to MR-1000 “Data” Ethernet port,
RJ45f, picture 2.
RS/ETH Link starts about 50 seconds. After that, test connection with “cmd ping
command”. RS/ETH Link default IP is 192.168.7.1. If ping test doesn’t work, something is
wrong, picture 3.
When virtual machine is started, it is possible to make connection with web browser (IE,
Firefox etc.)
Insert correct IP address to the browser address bar:
https://192.168.6.100 (DHCP, Lower Address Bound).
Correct IP address on Firefox address bar in picture 5.
When correct address is inserted and executed, following login page appears. Use default
information:
User: admin
Password: admin
Picture 3
Picture 4
Picture 2
Picture 5