User guide

MR-1000 user guide V1.3
6
Radio modems can be configured from either the RS or Ethernet ports, depending on the
equipment configuration. Please refer to your order information about your configuration.
This connection is optional, depending on model.
1. Install Brainboxes “Boost. LAN Manager” application to PC.
www.brainboxes.com/software (Appendix A)
2. Connect the MR-1000 front panel “NMS RJ45” connector to PC or Ethernet switch.
3. Open “Boost. LAN Manager” application and select “Find Devices “. Program
search connects the devices automatically.
NOTE! If the devices are not automatically detected, manual detection is possible
from “Tools “  “Add device manually “.For manual adding you need to know
your adapter IP-address (default IP is 192.168.127.254). Please see Brainboxes
manual for further information: www.brainboxes.com/docs (Appendix A))
3. CONFIGURING THE RADIO MODEMS
4. CONFIGURING THE ETHERNET / SERIAL ADAPTERS