User manual

Blackfin DEV-BF548-Lite. DEV-BF548DA-lite Hardware User Manual

This shows a sample boot screen. Depending on the current software version, you might get

different boot messages.

8. You can find a simple hello world program on your support CD or at the download section of

the product homepage. To start the sample program, type “xmr UART” on your terminal

program, then (Transfer  Send file) select the appropriate file “UART.ldr” depending on your

Core Module, choose protocol “Xmodem” and send. After the download has finished type “exec

UART” for executing the sample program.

9. Press reset to return to the BLACKSheep command line.

7.2 Debug Agent Setup (DEV-BF548DA-Lite only)

If you have purchased a DEV-BF548DA-Lite board with the Debug Agent mounted on the bottom side

of the board you can use it to download and debug your software with the VDSP++ development

environment from Analog Devices. An evaluation version is included in the support CD or you can

download it from our website or the website from Analog Devices. Currently the Debug Agent works

only with version 4.5 of the VDSP++ IDE.

Note: The Core Module will get warm while in use.

Please follow the instructions for installing and configuring VDSP++ to work with the Debug Agent.

1. Install VDSP++4.5

2. If available install the latest update for VDSP++4.5. You can download updates from the Analog

Devices website.