User manual

Blackfin DEV-BF548-Lite. DEV-BF548DA-lite Hardware User Manual
8
1 Introduction
NOTE: The DEV-BF548DA-Lite has an on-board Debug Agent, which is not available on the DEV-BF548-
Lite Board. All other features are identical! In this document, when describing both boards, the name
DEV-BF548-Lite is used.
The DEV-BF548-Lite Development Board with integrated Debug Agent is designed as a development
and application board for the high performance ADSP-BF548 based CM-BF548 Core Module. Special
feature of the board is the 10/100Mbit industrial Ethernet controller. The integrated Debug Agent is a
USB based debug interface which enables programming and debugging of the Blackfin Core Modules.
It is fully compatible with the Visual DSP++ development environment. The development board
provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be
plugged on top of the Development Board in order to enable additional interfaces.
1.1 Overview
The DEV-BF548-Lite Board includes the following components:
60 Pin Expansion Connector 2
USB to
UART
CM-BF548
64MB DDR SD RAM
8MB Flash
SD-Card
60 Pin Expansion Connector 1
CAN
DEBUG
AGENT
USB-OTG
10/100Mbit
(Ethernet
Controller)
DC/DC
Power Supply
(5V and 3V3)
80 Pin Expansion Connector 3
Figure 1-1: Overview of the DEV-BF548-Lite Board
 DC/DC Converters
o 5V@2A
o 3V3@1.5A (draws its power from the 5V output of the DC/DC)
 1 Core Module Slot
o Supports the CM-BF548 Core Module
 USB-to-UART Port
o Supports up to 915kbps UART-USB conversion.
o Emulates a standard COM port on the computer.
o Drivers for Windows and Linux available