User manual

PRESET NAME -> change the name

of preset selected by preset number.

Name is up to 12 letters.

SAVE -> save changed name

CANCEL -> return to main menu

Preset Save: Cre

ate-> Input-> Select#-> Output-> Select Multiple ##->If you add more input go to Input again->

If you done all Input and Output ->Enter-> Preset Save->

Preset Number -> Select#-> Preset Name-> Input Name->Save

Preset Call: Preset Call->

Select Preset Name-> Preset Call

3-2 Product number setting

• Product ID setting (DIP switch)

• It sets its own address of matrix if many matrixes are used.

• It sets in binary values.

mber is the value set in deep switches of the equ

• ipment and can be set in the values of 1 ~

OFF, 5 ON, 6 OFF, 7 OFF, 8 OFF

The product nu

255. If the value is set as “0”, then the channel does not work.

For example;

F, Product ID = 01 (00000001b) -- 1 ON, 2 OFF, 3 OFF, 4 OFF, 5 OFF, 6 OFF, 7 OFF, 8 OF

Produ

ct ID = 10 (00001010b) -- 1 OFF, 2 ON, 3 OFF, 4 ON, 5 OFF, 6 OFF, 7 OFF, 8 OFF

Product ID = 23 (00010111b) -- 1 ON, 2 ON, 3 ON, 4

**The product ID is set number “1” at the time of its delivery (Factory Default).

3-3

settings as follows:

•

You may set port COM 1 ~ 4 or you may use all available ports.

D0 D1 D2 D3 D4 D5 D6 D7

LSB MSB

RS-232C (COM PORT) communication setting

After booting the matrix, connect RS-232C cable and then make communication

• Execute DVI switch controller 3.0, MiniTerm.exe or hyper termina

Communication setting: