User`s guide

Memory Card Gateway
TM
User’s Guide
o For Linux, use the file management program to find the drive
mappings for your device. Search for the drive mapping that
corresponds with the memory card that you have inserted.
• Make sure that the memory card is properly inserted by:
o Checking that the corresponding LED for that memory card is
lighted.
 If it is not lighted, remove the memory card and reinsert it
properly. (See page 11 for instructions.)
 If the corresponding LED still does not light up, test the
memory card on a digital camera or other device to make
sure that the memory card is in working condition.
• Try to reattach the device by:
o Disabling the device on your computer, unplugging it, and plugging
it back in again.
My device lets me read files from the memory cards, but I can’t write or
copy any files to the memory card.
• Check to make sure that the memory card does not have a write
protection or lock mechanism.
o Remove the memory card from the device and check to see if it
has a write protection switch.
 If it does, set the switch so that the memory card is not write
protected.
 If it does not, there may be a problem with the memory card
or file that you are trying to copy. Check with the memory
card manufacturer for further options.
Technical Support Contact
If you are still having troubles using your Memory Card Gateway
TM
, please
contact Digital Foci, Inc. technical support at [phone].
Page 23
101-01-02