960H Series DVR User's Installation and Operation Manual Visit our website for detailed product spec 12000 Ford Road, Suite 110, Dallas, Texas 75234 Tel: 972-247-1203 Fax: 972-247-1291 www.idview.
User's Installation and Operation Manual Important Safeguards and Warnings Do not place heavy objects on the DVR. Do not let any solids or liquids fall into or infiltrate the DVR. Please brush the printed circuit boards, connectors, fans, machine box, and so on regularly. Please ensure that the power has been switched off and/or unplugged before cleaning the unit.
Directory 1 Production Introduction ........................................................................................................................................ 1 1.1 Product Overview ......................................................................................................................................... 1 1.2 Main Functions .............................................................................................................................................
.3.3 Video Loss ..................................................................................................................................... 39 4.3.4 Alarm input..................................................................................................................................... 41 4.3.5 Alarm output .................................................................................................................................. 42 4.3.6 Abnormal.....................................
1 Production Introduction 1.1 Product Overview This 960H series DVR is designed specially for the security and defense field which is an outstanding digital surveillance product. It introduces an embedded LINUX operating system which is more stable. It introduces a standard H.264mp video compressed format and a G.711A audio compressed format which ensures high quality image, low error coding ratio, and single frame playing.
-Individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading, and so on. -Multi-playback mode. -Zoom at an arbitrary region. Net Operating ·Through net tele-surveillance in real-time. ·Tele-PTZ control ·Tele-recording check and real-time playback. Alarm Linkage ·Alarm activated video to record, tour, message, buzzer, e-mail, and ftp. Communication Interface -RS485 interface which fulfills the alarm input and PTZ control.
-After opening the cover you should check for obvious damage as well as checking to ensure that the front panel, data cable, power cord, and motherboard connections are not loose. 2.2 Hard Disk Installation -For the first use please install the hard disk. This unit can install two hard disks with no limited capacity.
(1) Shift Indicator Light (2) System Indicator light (5) Outside Operation Indicator Light (6) Network Indicator Light (7)HDD Indicator Light (8) Next File (9) (10) Play Pause Fast Play (13) Function Switching (14) Direction & Enter (3) Alarm Indicator light (11) Next Frame (4) Record Indicator Light (12)Record (15) IR Remote Receiver (16) Previous File (17) Slow Play (18) Backwards Pause (19) Previous Frame (21) ESC (22) Power Switch (23) USB The Front Panel of the 1611ZA-960H Series Com
(1) Play/Pause/5 (2) Slow Play/6 (3) Fast Play/7 (4) Playback Pause/8 (5) Playback Stop/9 (6) Record (7) Power Switch (8) USB (9) Main Menu/0 (A) Screen Switch/1 (B) Record Search/2 (C) PTZ Control/3 (D) Assist/4 (E) Shift (F) Cancel (G) IR Remote Receiver (H) Direction & Enter (I) Light Indicator The Front Panel of the LP16D1-960H Series CompuLan Center dba/Digital IDView Technologies 12000 Ford Road, Suite 110, Dallas TX 75234 5
(1) Direction & Enter (2) Play pause/1 (3) Previous File/2 (4) N e x t F i l e 3 (5) Playback pause/4 (6) Light (7) Playback Stop/5 (8)IR Remote Receiver (9) Record Search/6 Indicator (A) Alarm Output/7 (D)Zoom i n /9 (E) Preset Point Setup/0 (F) USB (G) Cancel (H)Screen Switch (I) Record (K) Main Menu (L) Shift (M) Power Switch (B) Assist (J) PTZ (C)Zoom o u t /8 The Front Panel of the 811Z-960H & 1611Z-960H Series CompuLan Center dba/Digital IDView Technologies 12000 Ford Road, Suite
(1)IR remote Receiver (2)Power Indicator Light (3)Alarm Indicator Light (4)Keyboard Indicator Light (5)Record Indicator light(6)Network indicator light (7)Status Indicator Light (8)Function Indicator Light (9)Return Main Menu (10)PTZ (11)Playback (12)Previous File (13)Next File (14)Record (15)Slow Play (16)Playback Pause (17)Fast Play (18)Play back Stop (19)Direction & Enter (20)USB (21)Stop Play (22)ESC (23)Power Switch 2.
1 Video Input 2 4 Audio Input 5 7 USB 8 1 Video Input 2 4 Audio Input Video Output Audio Output RS485 3 VGA 6 Network 9 Power Video Output 3 12V Output The Rear Panel of the 1611ZA-960H Series CompuLan Center dba/Digital IDView Technologies 12000 Ford Road, Suite 110, Dallas TX 75234 8
1 Video Input 2 Audio Input 3 USB 4 Network 5 VGA 6 7 Power Supply 8 Switch 9 External Interface Video Output 10 Audio Output Power Supply VGA 3 Fan 6 Network The Rear Panel of the LP16D1-960H Series 1 Power Switch 2 4 Video Input 5 7 USB 8 External Interface 9 External Interface 10 Audio Output 11 Video Output 12 HDMI CompuLan Center dba/Digital IDView Technologies 12000 Ford Road, Suite 110, Dallas TX 75234 9
The Rear Panel of the 811Z-960H & 1611Z-960H Series 1 Video Input 2 Audio Input 3 4 HDMI 5 USB 6 Network 7 VGA 8 External Interface 9 Power Supply 10 Power Switch 11 Video Output 12 Audio Output 1 Video Input 2 3 HDMI 4 USB 5 Video Output Network 6 VGA 7 External Interface 8 Power Supply 9 Power Switch 10 Audio Input 11 Audio Output *this series of products have the same rear panels CompuLan Center dba/Digital IDView Technologies 12000 Ford Road, Suite 110, Dall
2.6 Audio and video input, and output connections 2.6.1 Video input connections The video input port is a BNC connector plug. The demand of the input signal is PAL/NTSC BNC(1.0VP-P,75Ω). The video signal must be accorded with the state standard which has a high signal to noise ratio, low aberration and low interference. The image must be clear and have natural color in the appropriate brightness.
2.6.4 Audio Signal Input Audio port is a BNC connection. The input impedance is high so the tone arm must be active. The audio signal line should be firm and away from the electro magnetic Interference and connected credible which avoids false and joint welding and oxidation. The high voltage current should be avoided especially. 2.6.
4. Front equipment grounding note Bad grounding can lead to the burnout of the chip. 5. Alarm input type unlimited The DVR alarm output port is a constant opening type.
2.7.1 Alarm input port specification 8 channels alarm input. The alarm input type is unlimited. The grounding and the com port of the alarm sensor are parallel (The alarm sensor is an external power supply) The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port. The grounding of the power supply and the alarm sensor must be shared when used in an external power supply. 2.7.
The 485 Interface Of Eight External alarms The 485 Interface of Sixteen External Alarms 2. Connect the video line with the DVR video input. 3. Electrify the speed dome. 3 Basic Operation Note: The button in gray display indicates nonsupport. 3.1 Turn On Plug in the power supply and turn on the power supply switch. The power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep.
3.2 Turn Off There are two methods to turn off the DVR. Entering the main menu and choosing ‘turn off’ in the turn off the system option is called a ‘Soft Switch’. Pressing the power supply switch is called a ‘Hard Switch’. Illumination: 1. Auto resume after power failure If the DVR is shut down abnormally, it can automatically backup video and resume it’s previous working status after the power failure. 2.
3.4 Preview You can right click your mouse to choose or switch between windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window. 1 Recording Status 3 Video Loss 2 Motion Detect 4 Camera Lock Table 3.1 Preview Icon 3.5 Desktop Shortcut Menu In the preview mode you can right click your mouse to get a desktop shortcut menu as picture 3.2 shows.
*compared to the analog/hybrid mode's shortcut menu the full digital mode does not have a color setting function. 3.5.1 Main Menu When you login, the system main menu is shown as below: Picture3.3 Main Menu 3.5.2 Playback There are two methods for you to play the video files in the hard disk. 1. In the desktop shortcut menu. 2. Main menu>Record->Playback Note: The hard disk that saves the video files must be set as read-write or read-only state.(4.5.1). Picture 3.
1. Playback control 2. Operation hint 4. Listed files 5. File information 3. File searching 【Listed Files】Look up the listed files that accord with the searching criteria. 【File Information】Look up the found file information. 【Playback Control】See details in the below chart: Key / Function Key Function Play/Pause Backward Play Slow Forward Fast Forward Previous Frame Next Frame Previous File Next File Round Play Full Screen Stop Picture 3.
Picture 3.8 Record Mode 【Schedule】Record according to the configuration. 【Manual】Click the ‘All’ button and the according channel is recording no matter the channel in any state. 【Stop】Click the ‘Stop’ button and the according channel stops recording no matter the channel in any state. 3.5.4 Alarm Output Please check the current channel status: “○” means it is not in alarming status, “●” means it is in alarming status.
Analog Channel – Only when the device is connected with the PTZ and the correctly configure protocolis ok. Operation interface is as follow and the functions include: PTZ Direction Control, Step, Zoom, Focus, Iris, Setup Operation, Patrol Between Spots, Trail Patrol, Boundary Scan, Assistant Switch, Light Switch, Level Rotation and so on. Note1. When the decoder’s A(B)line connects with DVR’s A(B)line then the connection is right. 2.
Step 2: click the Preset button, and then write the preset points in the input blank, Step 3: click Settings button, return the Picture 3.10 Complete setup, that is the preset points and preset position corresponds. Clear Preset：Input preset points, click Remove button, remove the preset. Preset point input blank Preset button Picture 3.11 Preset Settings 2）Preset Point Calls In Picture 3.10, click Page Shift button, enter PTZ control interface as shown in Picture 3.12.
been set up) Step 3: repeat step1 and step2, until set out all the preset designated cruise lines。 Remove Preset：Please input preset value in the blank, click Remove Preset button, then remove the preset points. Remove Cruise Line：Input the number of cruise line, click Remove Cruise Lines button, then remove the cruise lines set。 Preset Points Blank Cruise Button Time interval Cruise Line Blank Picture 3.13 Cruise between Points Settings 2）The Calls of Cruise between Points In Picture 3.
Scan value blank Scan Button Picture 3.14 Scan Setup 2）Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank, then click Scan button，PTZ begins to work on the scan line. Click Stop button to stop.
Left/Right scan setting button Line scan button border Picture 3.15 Boundary Scan Setup 2）Boundary Scan Calls In Picture 3.10, click Page Shift button, then enter PTZ control menu as shown in Picture 3.12. Please input the number of scan in the value blank, then click Scan button，PTZ begins to work on the scan line. Click Stop button to stop. 5、Horizontal Rotating Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position of the camera).
【Auxiliary Number】The operation of corresponding auxiliary switch according to PTZ agreement； 【Page Shift】In Picture 3.16，click Page Shift button enter the Picture 3.17 PTZ Main Menu , the menu itself can be control by the menu control buttons 3.5.6 Color setting *color setting only apply for Hybrid(HVR)/full analog(DVR) mode, and only analog channel can setting. Set the selective image parameters (current channel for single window display and cursor place for multi-window display).
Picture 3.19 Output Adjust Note: The black margin vertical & horizontal at output adjusts of hybrid mode is only effect to analog channel. 3.5.8 Logout Logout shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu]. Picture 3.20 Logout/Shutdown/Reboot the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint.
4 Main menu 4.1 Main menu navigation Main menu Sub menu Function Config Set the recording configuration, recording type, recording time section playback Record Set screen capture period, type, etc.
Set main (extra) coding parameter: code mode, resolving ability, frame rate, code stream control, image quality type, code stream value, frame Encode between value, video/audio enable, configuration Note ： only Hybrid mode and full analog mode have encode configuration.
Automatic maintenance Set automatic reboot system and automatic deleting files.
Picture 4.1 Record Configuration 【Channel】Choose the corresponding channel number to set the channel. Choose the all option to set the entire channels. 【Redundancy】Choose the redundancy function option to implement the file double backup function. Double backup is writing the video files in two hard disks. When you do the double backup, make sure that there are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to 4.5.1) 【Length】Set the time length of each video file.
4.2.2 Playback Refer to chapter 3.5.2. 4.2.3 Backup You can backup the video files to external storage through setup. Note：The storage must be installed before the file backup. If the backup is terminated, the already backup can playback individually. Picture 4.2 Backup 【Detect】Detect the storage connected with the DVR such as hard disk or universal disk. 【Backup】Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time.
Picture 4.3 Backup Remove：Clear the file information. Add：Show the file information satisfying the set file attributes. Backup format：configurate the backup file format, according to require, can choose Start/pause：Click the play button to start the backup and click the pause button to stop the backup. Note：During backup you can exit the page layout to carry out other functions. 【Burning】the file will be burned synchronously after click it.
Picture 4.2 snapshot storage 【Channel】Select the related channel to set, click "all" to set all channels. 【Presnap】Setup presnap picture quantity before recording, default is 5 pieces 【Record】Set record status. "Schedule", "Manual" and "Stop". Schedule：Realise snapshot according to record type (regular, detect and alarm) and period Manual：No matter what the present channel is in a state, once choose "manual" button, it will have snapshot at related channels.
4.3.1 Motion Detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage function is turned on. Note: "Advanced" button is the same as right click. *Motion detect function is different between Hybrid mode & Full digital mode: Digital channel: not only to enable motion detect function at local side, but also to enable the remote device that was connected.
Video detect in full digital(NVR) mode Pic 4.4 【Channel】Choose the set motion detect channel. 【Enable】■ means that the motion detect function is on. 【Sensitivity】Choose in the six options according to the sensitivity. . Note: Only the motion detect under hybrid mode/ full analog mode have this function of setting sensitivity, and also only the analog channel can set region. 【Region】Click [set] to enter the set area. The area is divided into PAL22X18. Red block means the motion detect defensive area.
Picture 4.5 Region 【Period】Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divided into four time sections.■ means the set valid. Picture 4.6 set the time section 【Interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.
Picture 4.7 PTZ Activation under hybrid mode 【Delay】When alarm is over, recording will last some seconds(10~300sec),then stop. 【Show message】Pop the alarm information dialog box in the local host computer screen. 【Send EMAIL】■ means sending an email to user when the alarm is turned on. Note: Set in the [NetService] and send email. 【FTP upload】to tick it, the video & picture of related record channel & snapshot channel will be uploaded to assigned position.
Video Blind in Hybrid mode Video blind in full digital (NVR) mode Pic 4.8 Video blind Set method: refer to chapter 4.3.1. Motion detect 4.3.3 Video Loss When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on.
*Same as motion detect function; video loss is different between Hybrid mode & full digital mode: Digital channel: not only to enable video loss function at local side, but also to enable the remote device that was connected. When remote device with video loss, local side will start alarm recording, otherwise this function is not enable. Hybrid mode: only need to enable video loss function at local side. Note: "Advanced" button is the same as right click.
4.3.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. *Alarm input is the same between hybrid mode & full digital mode, function enable, when it was set normal, only need to connect alarm sensor at alarm input port on local side, the alarm information is occurring, and will link to related setting functions at the same time Note: "Advanced" button is the same as right click.
Pic 4.10 Alarm input Set method: refer to chapter 4.3.1. Motion detect 4.3.5 Alarm output Refer to chapter 3.5.4. 4.3.6 Abnormal Analysing and inspecting current software and hardware of the device: When some abnormal events happen ,the device will make a relative answer such as show message and buzzer. Picture 4.
Pic 4.12 Intelligent analysis setting page 【Channel No.】Only shows by “1”，at present, only the 1st channel with maximum resolution of 1080P in the full analog (DVR) mode and hybrid (HVR) mode 【Enable】tick it to enable the video analysis function, then can go for further setting, 【Algorithm rule】at drop-down box to choose the algorithm rule of detection, 【Rule】choose different algorithm rules, the related setting page is different.
page, click Yes, alarm rules setting is finished. Pic 4.13 rules setting - cordon Items care: Show traces tick it to enable, when this function is triggered, there will be read box shows around the moving object Sensitivity , base on different requirements, there are 3 options in the drop-down box Minimum image distance range between 0~30 %，the more flexible the less image distance. Alert way: three modes: Items stranded、Items stolen、Illegal parking.
Pic 4.14 rule setting - items care Video diagnosis: Sensitivity: base on different requirements, there are 3 options in the drop-down box Detection type: there are 8 kinds of detection type: Brightness anomaly detection; Sharpness ; detection; Noise detection; Color cast detection; Screen freezes detection; Scene change detection; Anthropogenic interference and PTZ runway detection. You can choose one or more types if necessary, when video detects selected type, the alarm will be triggered.
Picture 4.16 the alarm image regarding one of the video analysis Video Teaching http://v.youku.com/v_show/id_XNDY5Mjc0OTcy.html http://v.youku.com/v_show/id_XNDY5Mjc3MjAw.html http://v.youku.com/v_show/id_XNDY5Mjc4ODg4.html http://v.youku.com/v_show/id_XNDY5Mjc4MDA0.html ,cordon , warning area , items stranded ,items stolen shift 4.
【Date format】Choose the date format: YMD, MDY, DMY. 【Date Separator】Choose list separator of the date format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】supports 29 languages at present: Arabic,Czech,English,Finnish,Greek,Indonesian,Italian,Japanese,Portuguese,Russian,Thai,T-Chinese,S-Chi nese,Turkish,Brazilian,Bulgarian,Farsi,French,German,Hebrew,Hungarian,Polish,Romanian,Spanish,Swedi sh,and Vietnamese 【HDD full】Choose stop record: Stop recording when the hard disk is full.
parameter in the left part, and set the extra stream parameter in the right part. Note: Extra stream introduces video compression technique which was applyed for multi-channel playback simultaneously, Dial-up multi-channel real-time monitor under poor bandwidth, or mobile monitor and so on. Pictureture 4.20 Encode setup Independent channel code setting 【Channel】Choose the channel number. 【Compression】Standard H.264 main profile. 【Resolution】Resolution type:1080P/720P/960H/D1/ HD1/CIF / QCIF.
4.4.3 Network setup Pictureture 4.21 Network 【Net Card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note：DHCP server is preinstalled. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0. 【Gateway】Set the default gateway. Default: 192.168.1.1. 【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address is offered by network provider.
or double click the service button to configure the parameters. Pictureture 4.22 NetService 【PPPoE setup】 Pictureture4.23 PPPOE Enable：Reverse■ means choose, setting can become effective. Input the user name and password that the ISP（Internet service provider）provides. After saving it reboot your system. Then the DVR will build a network connection based on PPPoE. The IP address will change into a dynamic IP address after the above operation is well done.
Pictureture 4.24 NTP The NTP server must be installed in the PC. Enable：Reverse■mean choose，setting can become effective. Host computer IP: Input the IP address installed NTP server. Port: Default: 123. You can set the port according to NTP server.
be translated only if it is the correct DNS configuration. Port: Email server port number. SSL: Decide whether using Secure Socket Layer protocol to login. User Name: Apply the email server user name. Password: Input the password corresponding to the user. Sender: Set the email sender address. Receiver: Send the email to appointed receivers when the alarm is turned on. You can set three receivers at most. Title: You can set as you wish.
Pictureture 4.27 DDNS setup It is the abbreviation of dynamic domain name server. Local domain name: Provide the domain name registered by DDNS. User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS. When the DDNS is successfully configured and start, you can connect the domain name in the IE address column to visit. Note：The DNS setup must be configured correctly in the network setup.
【User Name】User name of FTP 【Password】Password of user 【Anonymous】 ：enable anonymous, no need for the setting user name and password 【Max File Length】Max length for upload files at every packed, default 128M 【Dir Name】 ：The directory of upload file. Note: The user should have the authority to upload files. 【ARSP】 Startup DDNS server to add devices and manage it in the DDNS server Pictureture 4.
Picture: 4.30 alarm server setting 【Protocol type】GENERAL 【Enable】To click it means enable. 【Server IP】IP address of Alarm Server 【Port】Device Port No. 【Alarm Report】Click it means to report alarm information to server. 【Log Report】Click it, means to report log to server. 【Wireless Config】 ADSL through 3G net card, use CMS to visit and config the device Pictureture 4.
【User Name】User name of 3G 【Password】Password of dial user 【IP Address】IP address, got from dial 【Mobile Monitor Setup】 To visit the device by mobile, please make a router mapping of this port and use CMS to monitor and operate it by protocol. Pictureture 4.
need this port. 【Mobile Port】Router will automatically distribute Mobile Port for the device, when mobile monitor, it need this port. 【WIFI】 DVR connects to wireless router via WIFI module, and then to visit it through IP address, the precondition of using this function is to make sure the DVR has connected with WIFI modem. Picture 4.34 WIFI configure 【Search】 ：click【search】to search all the available wireless devices in current range. 【enable】 ：click it to enable firstly, then go for further setting.
【Enable】 ：■ means enable, click it firstly before setting. 【Port】 ：the default port is 554 4.4.5 GUI Display Configure the video output parameters including the front output mode and encode output mode. Front output：In the local preview mode include: channel title, time display, channel display, record status, alarm status, transparency and region cover.
Eight Settings under the “Full Digital Channel (NVR) Mode” Picture 4.36 Output Mode shown below 【Channel Name】Click the “channel name” to enter the “channel name” dialogue box. You could modify the channel name here (supports maximum of 25 English characters). 【Time Title】mark the check box to display the system data and time on the surveillance screen. 【Channel Title】mark the check box to display the system channel number/title on the surveillance screen.
Picture 4.37 PTZ configure 【Channel】Choose the dome camera input channel. 【Protocol】Choose the corresponding dome protocol. (PELCOD as an example) 【Address】Set as the corresponding dome address. Default: 1.（Note：The address must be consistent with the dome address.） 【Baud rate】Choose the corresponding dome baud rate length. You can control the PTZ . Default: 115200. 【Data bits】Include 5-8 options. Default: 8. 【Stop bits】Include 2 options. Default: 1.
4.38 RS485 device 【Protocol】choose related protocol of brand model( for example: IDView)； 【Address】set with corresponding address, default is 1； 【Baud rate】choose bard rate that related device use, default is 115200； 【Data bits】including 5-8 options，default is 8； 【Stop bits】including 2 options, default is 1； 【Parity】Include odd check, even check, sign check, blank check. Default: void.
Picture 4.40 tour configure 【interval】Set the patrol switch interval. The set range is 5-120 seconds. 【alarm tour】set the interval to shift alarm tour, range is 5-120 seconds, choose return when alarm ends, when alarm link to tour, system will auto shift to six-view after alarm finished. Remark：at preview mode, click upper right icon / can turn on / off tour（ mean turn on, mean turn off）. 4.4.
Picture 4.41 Spot configure 【interval】Set the patrol switch interval. The set range is 5-120 seconds. 4.5.0 Channel manage *Remark：only the HVR and 960Hseries product support this function.
Channel manage page under Hybrid (HVR) mode / full digital (NVR) mode Picture 4.
Multi-linkage page of Digital channel Picture 4.43 digital channel interface 【Channel】select channel title 【Enable】Open digital channel, click enable, then you can manage related settings 【Time Synchronization】Clicking it means the time of this channel and device is the same.
【Protocol】Default is TCP 【Remote channel】User can input remote channel title from the device that you want to connect remotely 【Stream】Default is main stream, it does not support extra-stream at present； 【Device address】IP address of device. 【Port】Default is 34567 【User name】Default is admin Remark: clicking 【search】will show all the devices that were searched, user can choose any of the devices that you like. Picture 4.
When a channel is added with device but it is not enabled, you will see as below: Channel status interface under full digital (NVR) mode (One of the channel without device) Remark: when the current resolution is over the max resolution that the channel supports, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see the below Picture: Channel m
Remark: this series of product with full analog channel mode, hybrid mode, full digital mode, and different model with different channel mode, user can shift the mode freely if necessary. 4.5 Advanced Manage tools menu includes: HDD manage, account manage, online user, output adjust, auto maintain, and upgrade. 4.5.1 HDD Manage Configure and manage the hard disk. The menu displays current hard disk information: hard disk number, input port, type, status and overall capability.
Picture 4.46 HDD manage 4.5.2 Account Manage the user purview. Note：1. The character length is 8 bytes at most for the following user and user team name. The blank ahead or behind the character string is invalid. The middle blank in the character string is valid. Legal characters include: letters, numbers, underlines, subtraction signs, and dots. 2. There is no limit in the user and user group. You can add or delete the user group according to user definition. The factory setup include: user\admin.
Picture 4.47 account management 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the character string is invalid. The middle blank in the character string is valid. Note：The user who possess the user control purview can modify his/her own or other users password Picture 4.48 modify password 【Add user】Add a user in the group and set the user purview.
Picture 4.49 Add User 【Add Group】Add a user group and set the purview. There are 33 different purviews: shut down the equipment, real time surveillance, playback, record setting, video backup and so on. Picture 4.50 add group 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button.
Picture 4.51 Delete Group 4.5.3 Online user To check the information of network user that connected with local device, also can click the selected user to break up connection, （make √ at the box） ，then the user will be frozen after connection stopped, and will not log in until device reboot. Picture 4.52 online user 4.5.4 TV adjust Refer to chapter 3.5.7. 4.5.5 Auto Maintain The user can set the time to auto reboot and auto delete file.
Picture 4.39 Auto maintain 4.5.6 Restore The system restore to the default. You can choose the items according to the menu. Picture 4.54 restores to default 4.5.7 Upgrade Picture 4.
【Upgrade】choose USB interface. 【Upgrade file】choose the upgrade file. 4.5.8 Device Info Provide device interface info like audio in, alarm in/out to be conveniently used for user. Picture 4.56 device info 4.5.9 Import / Export Users can export the log info and the configure file from device to connected flash by clicking, and also can import related configure file from flash by clicking to settings, which greatly bring convenience to the customers.
4.57 Import / Export interface 4.6 Info Display the hard disk information, including HDD info, code stream statistic, log info, version info 4.6.1 HDD info Display the hard disk state: hard disk type, overall capability, residual capability, the recording time and so on. Picture 4.58 HDD info Tips：○ means that the hard disk is normal. X means that the hard disk is broken-down. - means that there is no hard disk.
Picture 4.59 BPS 4.6.3 LOG To search log information based on the set search mode. Log information include: system operation, configuration operation, data management, alarm affair, recording operation, user management, file management and so on. Set the time section to look up and click the look up button. The log information will display as a list. (One page is 128 items) Press Page up or Page down button to look up and press delete button to clear all the log information. Picture 4.
4.6.4 Version Display the basic information such as hardware information, software version, issue date, serial number, NAT status and so on. Picture 4.61 version information 4.7 Shut down system Refer to chapter 3.5.8. Chapter 5: Cloud Technology Basic Operation 5.1 Cloud technology monitor Cloud technology makes the device one step on net, greatly bringing convenience for the customer to monitor via wide area network, this technology is using the serial no. to visit device.
Connect failed interface successfully connect interface Picture 5.1 cloud technology server connection status Log in cloud server Visit http://xmeye.net to see below log in page, it divides into two modes: by user and by device, the user can log in freely based on their need. *Remark: to log in “by user”, the user needs to register the first time.
Picture 5.3 cloud technology operation interface Device manage Mainly use to add device, click “add” to add the serial number of device to be monitored. Picture 5.
Picture 5.5 add interface at device manage *Remark：in Picture 5.5, the user name means the user name of monitored device; password means the password of related user. My Device Mainly shows all the added devices here, click the on-line device name, you can access to control this device accordingly. Picture 5.6 monitor page - log in by user *Remark：the icon of“ ” means offline, the device did not connect to server successfully.
Log in by device Picture 5.7 interface of log in by device Input the serial number of device and the verify code to monitor and control the device directly. Picture: 5.
6 FAQ and maintenance 6.1 FAQ If the problems you are experiencing are not listed, please contact the local service or call the HQ service provider. We are willing to offer assistance. 1、 The DVR can not boot up normally. Possible reasons are as followed: 2、 1 The power supply is not correct. 2 Switch power supply line does not have a good connection. 3 Switch power supply is damaged. 4 The program updating is wrong. 5 The hard disk is damaged or the hard disk lines are broken.
Possible reasons are as followed: 1 When using the BNC output, the option between the N mode and PAL mode is wrong and the image becomes black and white. 2 The DVR does not matched the monitor impedance. 3 The video transmission distance is too far or the loss of the video transmission line is too large. 4 6、 The color and brightness setting of the DVR is wrong. I can not find the video files in local playback mode. Possible reasons are as followed: 7、 1 The data line of the hard disk is damaged.
1 There is something wrong with the frontal PTZ. 2 The setting, connection or the installation of the PTZ decoder is not correct. 3 The connections are not correct. 4 The PTZ setting of the DVR is not correct. 5 The protocols of the PTZ decoder and the DVR are not matched. 6 The address of the PTZ decoder and the DVR are not matched.
3 MAC address is conflicted. 4 The net card of the DVR is bad. 16、 There is something wrong with the USB backup or writing a CD. Possible reasons are as followed: 1 The rewritable machine and the hard disk are sharing the same data lines. 2 The data is too much. Please stop recording and backup. 3 The data exceeds the backup storage. 4 The backup equipment is not compatible. 5 The backup equipment is damaged. 17、 The keyboard can not control the DVR.
3 The hard disk is damaged. 22、 The downloading files can not play. Possible reasons are as followed: 1 There is no media player. 2 There is no DX8.1 software or higher edition. 3 There is no DivX503Bundle.exe file to play AVI video files. 4 The DivX503Bundle.exe and ffdshow-2004 1012 .exe files must be installed in the windows XP system. 23、 I can not remember the advanced password or network code in the local menu operation. Please contact the local service or call the HQ service.
29、Picture will be frozen when multi-connection and shift devices. Picture coming out from the digital channel needs a few seconds, shift device means to show new Picture, and so it needs several seconds to buffer. 6.2 Maintenance 1 Please brush printed circuit boards, connectors, fans, machine box and so on regularly. 2 Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity.
Appendix 1.
Appendix 2.Mouse operation *Take right hand as an example The mouse in USB connection is supported.
Appendix 3.Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 120G~ 250G sizes to keep better stability.
