User's Manual

| 11
NOTE: The preset station you are about to set is indicated by the position of the square
along the right side of the remote control display.
Switching Between Monaural and Stereo Mode
With the DLO TuneStik you have the choice of transmitting in either Monaural or Stereo
Mode. Choose between the two based on what type of audio you’re playing and what
sounds best to you.
Monaural Mode allows for much better transmitter performance, and is also useful for
listening to audiobooks and most podcasts. Use Stereo Mode when you have a clear
empty signal to broadcast to, and for best sonic musical performance. If the static
increases or you move to a crowded FM radio area, try Monaural Mode for the strongest
transmitter signal strength possible.
To switch between Monaural Mode and Stereo Mode, press the Frequency Button, then
press the Backlight Button to toggle between the two modes. Your TuneStik remote
control will display 00 to indicate Monaural Mode and 88 to indicate Stereo Mode.
PRESET STATION 1 PRESET STATION 2 PRESET STATION 3 PRESET STATION 4
TuneStik_2_manual_GM_070928:Layout 1 9/28/07 4:47 PM Page 11