User's Manual

| 15
Tips + Troubleshooting
My iPod is not responding to my TuneStik.
Reset your iPod by toggling the Hold Switch on and then off again. Then press and
hold the Menu and Select Buttons until the Apple logo appears (6 to 10 seconds).
You may need to repeat this step. If you’re still experiencing difficulties, please visit
www.dlo.com/support for more help.
I’m having trouble finding an empty FM frequency in my area.
Be sure to look in the 100’s, not just in the 80’s or 90’s. Try scanning to a strong
station, then back down two frequencies - for example 103.5 to 103.1. If that fre-
quency is taken, try scanning to the next strong station and repeat. For more infor-
mation read the Finding Empty Radio Frequencies [pg. 12].
My music is playing but there seems to be a lot of static.
First, check that you have found an empty frequency. Unplug the TuneStik FM
transmitter to see if there might be a radio station interfering. If so, try another
frequency. Also, if you are using the TuneStik while connected to a car charger,
please note that some iPod car chargers are not shielded properly. This may cause
interference from your car’s electrical system, which affects the sound quality of
your TuneStik’s FM transmission. Be sure to purchase a DLO Auto Charger, or a
charger of similar quality, to ensure proper performance.
TuneStik_2_manual_GM_070928:Layout 1 9/28/07 4:47 PM Page 15