User's Manual

| 9
Using Your TuneStik
Setting Up Your TuneStik
Connect the TuneStik FM transmitter to your iPod dock connector. Secure your
TuneStik remote control to your car’s steering wheel using the included steering
wheel cradle and velcro steering wheel strap.
Next, tune your car stereo to an empty frequency. Press the Frequency Button on
your TuneStik remote control, which will then display “88.5” and the preset indica-
tor. You are now in Frequency Mode. You can then use the +/- Buttons to match the
frequency on your TuneStik remote control’s display to the empty frequency on your
car stereo.
The initial broadcast frequency for the TuneStik is 88.5. But, your TuneStik can be
programmed with preset stations for easy recall with just a press of the Frequency
Button. For help doing this, please see Setting a Preset Frequency [pg.10] The
default preset frequencies on your TuneStik are 88.5, 88.1, 94.9 and 107.9. To cycle
through these preset stations, simply press the Frequency Button on the TuneStik
remote control.
If your TuneStik is connected and your iPod is not playing, there should be silence.
If 88.5, or one of the other presets (88.1, 94.9 and 107.9), is not an empty frequency
in your area (i.e., there is music or talk already on that station), you may hear stat-
ic. Try finding another station on your radio with less interference. For help doing
this, please see Finding Empty Radio Frequencies [pg. 12].
TuneStik_2_manual_GM_070928:Layout 1 9/28/07 4:47 PM Page 9