User manual

DIGITAL-LOGIC AG MSEBX800/900 Detailed Manual V1.0
16
External Interfaces Specification
Video Interfaces CRT1, DVO
USB V1.1/2.0 4 Ports
LPT IEEE1293 Printer
COM1 RS232
COM2 RS232
COM3 -
COM4 -
Keyboard PS/2
Mouse PS/2
Floppy 26pin FCC Interface for TEAC Mini-Floppy
Parallel-Hard disk 2.5” 2 x 44pin RM2.0mm ATAIDE-cable
Parallel-Hard disk 3.5” 2 x 40pin RM2.5mm PATA-IDE cable
Speaker 0.1Watt Speaker
ISA-Bus PC/104
PCI-Bus PC/104plus
PCI-Riser-Bus PCI-Slot
Power Supply Specification
Input voltage Nominal 8V-30V, maximum Ripple=200mVpp
Input inrush current t.b.d.
Protection EMI filtered
Spec. None
3.3Volt Power Output Not available
Power Consumption Specification
With 256MByte Typical (10W) at 500MHz
Typical (11W) at 600MHz
Standby Typical 0.5 Amp.
Power off (if VCC 12V) Typical 7.3mA
Power off (if VCC 19V) Typical 8.6mA
Power off (if VCC 24V) Typical 9.6mA
Physical Characteristics Specification PC/104plus
Dimensions Length: 203mm
Depth: 146mm
Height: 33mm
Weight 300gr
Operating Environment Specification
Relative Humidity 5 - 90% non-condensing
IEC68-2-30 at -20° to +50°C operating
Vibration operating IEC68-2-6 10-50Hz, 0.075mm and 55-500Hz, 1.0G
Vibration non-operating IEC68-2-6 10-50Hz, 0.15mm and 55-500Hz, 2.0G
Shock operating IEC68-2-27 10G, 11ms ½ sine
Shock non-operating IEC68-2-27 50G, 11ms, ½ sine
Altitude IEC68-2-13 4571meter operating
Temperature operating IEC68-2-1,2,14: MSEBX800 Standard -20°C to +60°C
Extended Temp. option MIL-810-501/502 see separate table below
Temperature storage IEC68-2-1,2,14-65°C to +125°C 
 The backup battery is limited on -40°C to +80°C
operating and storage temperature!