User manual

DIGITAL-LOGIC AG MSB900/L Detailed Technical Manual V1.0

For internal use only:

File: MSB900_Detailed_V1.0

Path: R:\HANDBUCH\MSB\MSB900\MSB900_Detailed_V1.0.doc



 2008 BY DIGITAL-LOGIC AG

This publication is protected by copyright and all rights are reserved. No part of this document may be repro-

duced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic, me-

chanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG.

The software described herein, together with this document, are furnished under a license agreement and

may be used or copied only in accordance with the terms of that agreement.

About this Manual and How to Use It

This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems

based on the single board MICROSPACE-PC. It is for integrators and programmers of systems based on the

MICROSPACE-Computer family. This manual provides instructions for installing and configuring the board,

and describes the system and setup requirements. This document contains information on hardware re-

quirements, interconnections, and details of how to program the system. Please check the Product CD for

further information and manuals.

REVISION HISTORY:

Document

Version

Date/Initials:

Modification:

Remarks, News, Attention:

V1.0 02.2008 DAR Initial document

Attention!

1. All information in this manual, and the product, are subject to change without prior notice.

2. Read this manual prior to installation of the product.

3. Read the security information carefully prior to installation of the product.