User manual

DIGITAL-LOGIC AG MSB900/L Detailed Technical Manual V1.0

1. PREFACE

The information contained in this manual has been carefully checked and is believed to be accurate; it is

subject to change without notice. Product advances mean that some specifications may have changed.

DIGITAL-LOGIC AG assumes no responsibility for any inaccuracies, or the consequences thereof, that may

appear in this manual. Furthermore, DIGITAL-LOGIC AG does not accept any liability arising from the use or

application of any circuit or product described herein.

1.1. Trademarks

DIGITAL-LOGIC, DIGITAL-LOGIC-Logo, MICROSPACE, and smartModule are registered trademarks

owned worldwide by DIGITAL-LOGIC AG, Luterbach (Switzerland). In addition, this document may include

names, company logos, and registered trademarks which are, therefore, proprietary to their respective own-

ers.

1.2. Disclaimer

DIGITAL-LOGIC AG makes no representations or warranties with respect to the contents of this manual, and

specifically disclaims any implied warranty of merchantability or fitness, for any particular purpose. DIGITAL-

LOGIC AG shall, under no circumstances, be liable for incidental or consequential damages or related ex-

penses resulting from the use of this product, even if it has been notified of the possibility of such damage.

1.3. Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements wherever possible.

Many of the components used (structural parts, printed circuit boards, connectors, batteries, etc.) are capa-

ble of being recycled. Final disposal of this product after its service life must be accomplished in accordance

with applicable country, state, or local laws or regulations.

1.4. Who should use this Product

 Electrical engineers with know-how in PC-technology.

 Because of the complexity and the variability of PC-technology, we cannot guarantee that the product

will work in any particular situation or set-up. Our technical support will try to help you find a solution.

 Pay attention to electrostatic discharges; use a CMOS protected workplace.

 Power supply must be OFF when working on the board or connecting any cables or devices.