User manual

Kontron Compact Computers AG SMX945 Detailed Manual V1.1

6.1.6. Dimensions of the Carrier Board Connector

SMX-CON8:

Standard height: 8.0mm

KCC part number: 807138

AMP/Tyco: 8-6318491-6

(components placed below the smartModule total a maximum 2.0mm)

6.1.7. Component Heights between Module and Carrier Board

Parts mounted on the back side of the module (in the space between the bottom surface of the module PCB

and the carrier board) should have a maximum height of 8.0mm.

8mm stack height standard for SMX945:

If the carrier board uses the 8mm stack option, then the carrier board topside components within the

module envelope are limited to a height of 1.6mm, with the exception of the mating connectors. Using

carrier board topside components up to 1.6mm allows a gap of 0.4mm between the carrier board

topside components and the module’s bottom side components.