User manual

Kontron Compact Computers AG SMX945 Detailed Manual V1.1
34
Pictured: electric connection on the MSEBX945.
Step 3:
Plug the fan into the electric connection on the host
board. For example:
On the MSEBX945 V1.0:
Connector X207 Pin1 (GND) and Pin2 (FAN1_PWR)
or
Connector X208 Pin1 (GND) and Pin2 (FAN2_PWR)
On the MSM945:
Connector X205
6.2.2. SODIMM-DDR2 RAM
Step 1:
In the case of an active heat sink, remove the
electric fan connector.
This step is not required for a passive heat sink.
(The photo shows the basic MSEBX945 board with
active heat sink.)
Step 2:
Remove the 3 screws from the heat sink and
dismantle the heat sink.
Screw Type: Cylinder hexagon socket type screw
M2x6mm / BN7 DIN912 ISO 4762
Tool: Hexagon head socket wrench no. 1.5.