User`s manual

36
LED Error Messages
Before cooling, the LED will blink three (3) times in two (2) second intervals. The LED message is

0.3 seconds. The LED messages are listed below:
errOr cOde MeSSaGe led flaSh
Environment Over Temperature 1 long blink / 1 short blink
DMD Over Temperature 1 long blink / 2 short blinks
Lamp Over Temperature 1 long blink / 3 short blinks
Fan1 Locked
1 long blink / 4 short blinks
Fan2 Locked
2 long blinks / 2 short blinks
Fan3 Locked
2 long blinks / 3 short blinks
Fan4 Locked 2 long blinks / 4 short blinks
DMD Initial Fail 3 long blinks / 1 short blink
Lamp Initial Fail 3 long blinks / 2 short blinks
Ballast UART Error 3 long blinks / 3 short blinks
Temperature Sensor Fail 3 long blinks / 4 short blinks
Inter Lock Open 4 long blinks / 1 short blink