User`s guide

COM Port: Select the virtual COM Port to which the Admin Reader is connected.
Baud Rate : Select the baud rate at which the System Link communicates with the Admin
Reader. The default Baud Rate is 9600.
Max Code Length: Select the number of characters, 5 or 6, for the user code.
Reader Model : Select the connection used for the Admin Reader.
•
Serial : Select this option when using a Reader connected to a serial port.
•
USB 6081 : Select this option when using a Reader connected to the USB port.
Test: Click the Test button to ensure that you have the proper COM Port and Baud Rate.
For more information about the Admin Reader, see Scanning Proximity Cards on page
62.
Modules Tab
The options available in this tab are only present when using a module, such as the Alarm
Monitoring Module, the Command Center, or the Advanced Reporting Module. Refer to the
User’s Guide for the module for information.
Configuring Operators
The programming options in the System Link Operator Configuration window are
available on three tabs, Operator Information, Panel Programming, and User and
Status Programming. To give users authority to log in to System Link, select
System > Operator Configuration.
Operator Information Tab
Login Information:
To authorize a new
operator to log in to
System Link, click on
the New button at the
bottom left corner of
the window. In the
Login Information fields,
enter a Login and
Password for the new
user. At Re-enter
Password retype the
same password to verify.
Each login ID and
password may have up to 32 characters.
Personal Information: Enter the operator last and first
names.
Account Access: To authorize the operator to access all
accounts, select All. To restrict the operator to certain
accounts, select Restrict and click the . . . button. In the
Select Accounts window, place a checkmark next to the
accounts the operator is authorized to access.
Note: The Account Access restrict option does not prevent
an operator from using the trap function to send and/or
retrieve changes made by other operators.
Note: When the Account Groups module is enabled, the
Account Access restrict option does not prevent an
operator from adding users and the display only lists
accounts the operator is authorized to access.
System Link User’s Guide 23