User`s guide

Copying User Code Information
To copy a user and the user code information to another partition or another panel of the
same model, open the panel from which you will copy the user code information. Select
Programming > User Codes.
Note: Profiles must be the same in both panels and both partitions to accurately copy and
paste user code information.
Pasting User Information into a Different Partition
In the User Codes window, select the user to be copied from the list on the left-hand
side. Click the Copy button. Click the Paste button. This will automatically paste the
user into the panel, allowing you to then change the Partition number.
Pasting User Information into a Different Panel
Note: To copy a user to a different panel, the two panel models must be the same. For
example, to copy a user from an XR40 Command Processor™ Panel, the second panel must
be an XR40.
In the User Codes window, select the user to be copied from the list on the left-hand
side. Click the Copy button.
Select File > Close Panel to close that panel. Then select File > Panel Information
and open the panel to which you will copy the user code information.
Select Programming > User Codes and click the Paste button. This will paste all of the
user code information you copied from the first panel into the second panel.
Batch Import/Export/Delete User Codes
The Batch Import/Export User Codes window allows you to import, export and/or delete
large numbers of users from a panel file at one time.
The Batch
Import/Export
User Codes
menu is
available on:
XR100
XR100N
XR500
XR500N
XR500E
XR2500F
Import User Codes
To import User Codes, click on the Import tab. In the File Name field, select the Tab
Delimited .txt file containing the user codes to import.
System Link requires the following data in this specific order
for a successful user import. A header row is not required.
User Number (maximum 4 digits)
User Name (maximum 16 character)
User Code (maximum 6 digits)
User Profile (maximum 2 digits)
User Pin (maximum 6 digits) typically 0 (zero)
Description (maximum 1024 characters)
Note: The User Pin column is required for user code import.
If the panel does not require a pin number, populate this
field with 0 (zero).
Click Load File to display the user codes contained in the selected .txt file. All user codes
eligible for import are automatically checked. A user that already exists in the panel
cannot be selected for import.
Click Import to add selected user codes to the panel.
System Link User’s Guide
62