User's Manual

Digital Monitoring Products 7000 Series Keypad Installation Sheet
8
7000 Series Keypad Installation Sheet Digital Monitoring Products
9
If the system is disarmed when you present your card, once the card is validated all areas are armed in the AWAY
mode.
PERIM ALL
DI
S ARM?
or
The system arms or disarms the areas and activates
the door strike relay on 7075 Keypads only.
Figure 9: All Perimeter Arming and Disarming
7075 Keypad Door Strike
Area and All/Perimeter Door Strike. From the Status List, present your card to the reader. Once the system
validates the card, the Door Strike relay activates. Home/Away systems only activate the Door Strike relay when
arming and disarming.
ABC SECURITY
ARM DISARM
While the keypad displays
the Status List, present
your access card.
Typically, the relay activates for 5 seconds
during which time you can open the door
.
Once you open the door, you have 40
seconds to exit and close the door
befo
re the Zone 2 Soft-Shunt expires.
Figure 10: Present Access Card
7075 Keypad Entry Delay
All Systems. On 7075 keypads, once the protected door is opened and the entry delay starts, the keypad displays
ENTER CODE: - . Present your card to the reader. Once validated, the system disarms all areas accessible by you
and activates the Door Strike relay. Area systems provide a delay to allow selected areas only to be disarmed. See
Arming and Disarming above.
Access door opens.
The System disarms the area and activates the
Door Strike Relay.
ABC SECURITY
ENTER CODE:>
Figure 11: Entry Delay