User's Manual

Digital Monitoring Products XT30/XT50 Installation Guide
2
IntroduCtIon
Introduction
2.1 Description
TheDMPXT30/XT50panelsare12VDCcombinationburglaryandresidentialrealarmpanelswithbattery
backup.TheXT30andXT50panelsprovidenineon-boardburglaryzonesandoneon-board12VDCClassB
poweredrezone.Therezonehasaresetcapabilitytoprovidefor2-wiresmokedetectors,relays,or
otherlatchingdevices.ThepanelscancommunicatetoDMPSCS-1RReceiversusingSDLCdigitaldialer,IP
Network,orCellularreportingformats.ContactIDreportingisalsoavailabletoCIDcompatiblereceivers.
TheXT30has10onboardzonesand5keypadbusaddressesfor20hardwiredorwirelesszonesforatotalof
30zones.TheXT50has10onboardzones,5keypadbusaddressesfor20hardwiredorwirelesszones,and20
additionalonboardwirelesszonesforatotalof50availablezones.
2.2 System Congurations
The panels can be programmed to operate as either an All/Perimeter system that provides one perimeter
areaandoneinteriorarea,orasaHome/Sleep/Awaysystemthatprovidesoneperimeter,oneinterior,and
one bedroom area. The bedroom area provides for any protection devices the user wants disarmed during
theirsleepinghoursandarmedintheAwaymode.Inaddition,theXT30/XT50canoperateasafourarea
system.
2.3 Before You Begin
Beforeinstallingthepanel,werecommendyoureadthroughtheentirecontentsofthisguide.Familiarize
yourselfwiththefeaturesofthepanelandthekeypointstorememberduringtheinstallation.Besureto
read and understand all of the caution statements printed in bold italics. In addition to this installation
guide,youshouldalsoreadthroughandfamiliarizeyourselfwiththeseotherproductdocuments:
• XT30/XT50ProgrammingGuide
• XT30/XT50User’sGuide 
2.4 About this Guide
Theinformationcontainedinthisguideisorganizedintovesections:
• The Table of Contents at the front of this guide lists all of the headings and the page number where
the information can be found.
• TheIntroduction section gives you an overview of the various components that go into a
panelsystemanddiagramssometypicalsystemcongurations.
• TheInstallation sectionbeginswithmountinginstructionsfortheenclosureandtakesyouthroughthe
proper way to power up the panel prior to programming.
• TheWiring Diagram section provides common system drawings for the panels.
Caution notes
Throughoutthisguideyouwillseecautionnotescontaininginformationyouneedtoknowwheninstalling
thepanel.Thesecautionsareindicatedwithayieldsign.Wheneveryouseeacautionnote,makesureyou
completely read and understand its information. Failing to follow the caution note can cause damage to the
equipmentorimproperoperationofoneormorecomponentsinthesystem.Seetheexampleshownbelow.
Always ground the panel before applying power to any devices: The panel must be properly grounded
before connecting any devices or applying power to the panel. Proper grounding protects against
ElectrostaticDischarge(ESD)thatcandamagesystemcomponents.
Remove All Power From the Panel! Remove all AC and Battery power from the panel before installing or
connecting any modules, cards, or wires to the panel.
2.5 NRTL Compliance Instructions
ForapplicationsthatmustconformtoalocalauthoritiesinstallationstandardoraNRTL(NationalRecognized
TestingLaboratory)certicatedsystem,pleaseseetheNRTLListedSpecicationssectionneartheendofthis
guide for additional instructions.