User's Manual
Table Of Contents
- Panel Specifications
- Introduction
- System Components
- Installation
- Primary Power Supply
- Secondary Power Supply
- Bell Output
- Keypad Data Bus
- Smoke and Glassbreak Detector Output
- Burglary Zones
- Powered Zone for 2-Wire Smoke Detectors
- Annunciator Outputs
- Telephone RJ Connector
- Ethernet Connector J1
- Reset Header J16
- Flash Load Jumper J18
- Cellular Connections
- On-Board 1100 Series Wireless Antenna Connection
- Wireless Keypads
- Listed Compliance Specifications
- Household Burglar-Alarm System Units ANSI/UL 1023
- Digital Burglar Alarm Communicator System Units ANSI/UL 1635
- Central Station Burglar Alarm Units ANSI/UL 1610
- Household Fire Warning System ANSI/UL 985 NFPA 72 Specifications
- California State Fire Marshal Specifications
- False Alarm Reduction Programmable Options ANSI/SIA CP-01-2010
- Troubleshooting
- Wiring Diagrams
- Revisions to This Document
Digital Monitoring Products XT30/XT50 Installation Guide
ii
Table of ConTenTs
Powered Zone for 2-Wire Smoke Detectors
11.1 Terminals 25 and 26 ..............................12
Annunciator Outputs
12.1 Description ...........................................12
12.2 HarnessWiring .....................................12
12.3 Model 860 Relay Module ........................12
Telephone RJ Connector
13.1 Description ...........................................13
13.2 FCCRegistration ...................................13
13.3 Notication ........................................... 13
Ethernet Connector J1
14.1 Description ...........................................13
14.2 EthernetLEDs ......................................13
Reset Header J16
15.1 Description ...........................................14
Flash Load Jumper J18
16.1 Description ..........................................15
Cellular Connections
17.1 Cellular ...............................................15
On-Board 1100 Series Wireless Antenna Connection
18.1 Wireless Antenna .................................16
18.2 LEDOperation ......................................16
Wireless Keypads
19.1 MountingKeypads ................................16
19.2 Wireless Keypad Association ..................16
Listed Compliance Specications
20.1 Introduction .........................................17
20.2 Bypass Reports .....................................17
20.3 CurrentDraw ........................................ 17
20.4 Battery Standby ....................................17
20.5 Auxiliary and Bell Current ......................17
20.6 CrossZoning ........................................17
20.7 SoftwareVersion ...................................17
20.8 App Key ...............................................17
Household Burglar-Alarm System Units
ANSI/UL 1023
21.1 Bell Cutoff ............................................17
21.2 EntryDelay ..........................................17
21.3 ExitDelay ............................................. 17
21.4 Wireless External Contact ......................17
21.5 WirelessSupervisionTime .....................17
21.6 Wireless Audible Annunciation ...............17
21.7 Panel location .......................................17
21.8 Test Frequency .....................................17
Digital Burglar Alarm Communicator System Units
ANSI/UL 1635
22.1 EntryDelay ..........................................17
22.2 ExitDelay ............................................. 17
22.3 Test Frequency .....................................17
22.4 Automatic Bell Test ...............................17