User's Manual
Table Of Contents
- 9800 Series
- Wireless Graphic Touchscreen Keypads
- DMP Keypad Features
- Touchscreen Display
- Internal Speaker Operation
- Micro SD Card
- AC Power/Armed LED Operation
- Internal Card Reader
- End-User Options
- Keypad Serial Number
- Installing the Keypad
- Programming the Keypad in the Panel
- Installer Options Menu
- Appendix
- Keypad Arming and Disarming
- Keypad Door Strike
- Keypad Entry Delay
- Compliance Specifications
- Keypad Specifications
- FCC Information
- Industry Canada Information
- Specifications
- Compatibility
- Listings and Approvals
- Accessories
9800 Series Keypad Installation Guide 11
RequIRe SITe
cODe: nO yeS
Require Site Code
Press YES to use a site code, for non-DMP cards, and press
CMD to view the site code entry display. Default is NO.
In addition to User Code verication, door access is only
granted when any one site code programmed at the SITE
CODES entry option matches the site code received in the
Wiegand string. You can program up to eight three-digit
site codes.
Note: A card with a site code greater than three
digits cannot be used. Use only cards with three-digit
site codes.
SITe cODeS 1-4
> > > >
Site Codes 1-4
Enter site codes 1-4 (left to right separated by > sign).
Press the > sign to add, delete, or change the site code.
Press CMD to save the entry. Site code range is 0-999.
SITe cODeS 5-8
> > > >
Site Codes 5-8
Enter site codes 5-8 (left to right separated by > sign).
Press the > sign to add, delete, or change the site code.
Press CMD to save the entry. Site code range is 0-999.
No Communication With Panel
This option denes the relay action when communication
with the panel has not occurred for ve seconds. Press
any select area to display CHOOSE ACTION.
The default is Relay Always Off.
Choose the No Communication with Panel action that
is required.
Press OFF to choose [Default] (Relay Always Off) — The
relay does not turn on when any Wiegand string is
received. Off does not affect any REX operation.
Press SITE to choose (Accept Site Code) — Door access
is granted when the Wiegand site code string received
matches any site code programmed at SITE CODE
ENTRY. For details refer back to the REQUIRE SITE CODE
option.
Press ANY to choose (Any Wiegand Read) — Door access
is granted when any Wiegand string is received.
Press ON to choose (Relay Always On) — The relay is
always on.
Press the CMD key to display the next action.
Press LAST to choose (Keep Last State) — The relay
remains in the same state and does not change when
communication is lost.
After choosing the action, the NO COMM WITH PNL
option and the newly dened action display. Press CMD
to save the entry. Press the Back Arrow to return to
REQUIRE SITE CODE:.
nO cOmm WITH Pnl
OFF
cHOOSe AcTIOn
OFF SITe Any On
cHOOSe AcTIOn
lAST