User's Manual
Table Of Contents
- 9800 Series
- Wireless Graphic Touchscreen Keypads
- DMP Keypad Features
- Touchscreen Display
- Internal Speaker Operation
- Micro SD Card
- AC Power/Armed LED Operation
- Internal Card Reader
- End-User Options
- Keypad Serial Number
- Installing the Keypad
- Programming the Keypad in the Panel
- Installer Options Menu
- Appendix
- Keypad Arming and Disarming
- Keypad Door Strike
- Keypad Entry Delay
- Compliance Specifications
- Keypad Specifications
- FCC Information
- Industry Canada Information
- Specifications
- Compatibility
- Listings and Approvals
- Accessories
14 9800 Series Keypad Installation Guide
Accessing Keypad Diagnostics
If necessary, refer to Access the Options Menu earlier in this document.
KPD KPD KPD
OPT DIAG RF STOP
Keypad Diagnostics (KPD DIAG)
This option displays Zone Test.
Z1 OPen Z2 OPen
Z3 OPen Z4 OPen
Zone Test
This option allows the keypads to display the current
electrical status of the four protection zones. The status is
shown as OPEN, SHRT, or OKAY.
Note: The Zone Test displays on other keypads without
built-in zones, but is not operational.
InPuT WIeGAnD
Input Wiegand
This option tests the internal and external reader input
from proximity credentials. The display shows OKAY each
time a good proximity read is received.
Exiting the Installer Options
Press the CMD key until the display returns to the Installer Options screen. Select
STOP to exit the Installer Options function.