User's Manual

Digital Monitoring Products CellComSL Series Universal Communicator Installation and Programming Guide
22
z-wave setup
Z-Wave Setup
(Model CellComSLCZ Only)
YoursystemmayincludeaDMPZ-Wavecontroller.TheZ-Wavecontrollerallowsshortrangeradiocontrolof
Z-Wavedevicesthatyouoryourinstallationcompanymayprovidesuchaslightingcontrolmodules,thermostat
controls, doors, and garage doors. Z-WaveSetupallowsyoutoprogramthesystemtocontroltheZ-Wave
devices.YoumaycontrolyourZ-WavedevicesfromyourSmartphoneusingtheDMPVirtualKeypadAppor
withtheVirtualKeypadBrowser.Theavailablesetupoptionsare:Add,List,Remove,Favorites,Transferand
Optimize.
• SelectADDtoaddaZ-Wavedevicetoyoursystem.
• SelectLISTtodisplayalistofZ-Wavedevicesalreadyaddedandstoredinyoursystem.
• SelectREMOVEtocompletelyremoveaZ-Wavedevicefromyoursystem.
• SelectFAVtoAdd,EditorRemoveaFavorite.
• SelectXFERtotransferZ-Wavedeviceinformationfromanothermanufacturer’sportableZ-Wavecontrollerto
your system.
• SelectOPTtoupdatecommunicationwithallZ-Wavedevicesprogrammedonyoursystem.OPTcanbeused
tore-establishcommunicationafteraZ-Wavedevicehasbeenmovedtoadifferentlocation.
Note:OnlyMasterUserCodeLevelcanaccessZ-WaveSetupthroughtheUserMenutoprogramyourZ-Wave
devices.ForinformationonaddingZ-WavedevicesfromtheVirtualKeypadApp,tapOnlineHelpfromthe
SettingstabfromtheApp.
17.1 Add Z-Wave Devices (ADD)
ThisoptionallowsyoutoADDaZ-Wavedevicetoyoursystem.Onceadded,aZ-Wavedevicemaybeassignedto
a Favorite.
AccesstheUserMenu.
Press COMMANDuntilZWAVESETUP?displays.
PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
SelectADD.PROCESSINGmaybrieydisplay.WhenPRESSBUTTONONDEVICETOADDdisplayspresstheprogram
button on the Z-Wavedevice.SeetheZ-Wavedevice’sdocumentationformoreinformation.
Whenthedeviceinformationisreceivedbythesystem,thekeypadbeepsonceanddisplaysDEVICEFOUND.
Onceadded,thekeypaddisplaysthetypeofdeviceandthedefaultdevicename.PressCOMMAND.
PressanytoprowSelectkeyandenteruptoa16charactercustomnameforthedevice.
Press the COMMANDkeytostorethenewname.
Note:Amaximumof232Z-Wavedevicescanbeaddedtothesystem.Whenthemaximumnumberofdeviceshave
beenadded,thekeypaddisplaysZWAVETABLEFULLandnoadditionalZ-Wavedevicesmaybeaddedwithout
removing some existing devices.
17.2 List Z-Wave Devices (LIST)
ThisoptionallowsyoutoeditthenameofaZ-WavedeviceorconrmradiocommunicationwiththeZ-Wave
device.WhenLISTisselected,therstZ-Wavedevicestoredinthesystemisdisplayed.Remainingdevicescan
be viewed by pressing the COMMANDkey.Lightingcontrolmodules,aredisplayedrst,followedbydoorsand
then thermostat controls.
TheavailableLISToptionsare:RenameandStatus.
• SelectRENAMEtoenterupto16charactersforanewdevicename.
• SelectSTATUStoconrmradiocommunicationwiththeZ-Wavedevice.
17.3 RENAME Z-Wave Devices
1. AccesstheUserMenu.
2. PressCOMMANDuntilZWAVESETUP?displays.
3. PressanySelectkey.ThekeypaddisplaysADDLISTREMOVE.
4. SelectLISTtodisplayDEVICELISTandtherstZ-Wavedevicestored.PresstheCOMMANDkeytoadvance
through the list of Z-Wavedevices.
5. PressanySelectkeytodisplayDEVICERENAMESTATUS.
6. SelectRENAMEandenterupto16charactersforanewdevicename.SeeEnteringNamesinAppendixD.
7. PressCOMMANDtosavethenewZ-WavedevicenameandreturntotheDEVICELIST.